See thru Optic Mount

[M60joe]

Use a optic or see thru the optic rail for the peeps.

http://users.zoominternet.net/~picplace/Picthumb/mk760mount.JPG

http://users.zoominternet.net/~picplace/Picthumb/mk760mount1.JPG

http://users.zoominternet.net/~picplace/Picthumb/mk760mount2.JPG

http://users.zoominternet.net/~picplace/Picthumb/mk760mount3.JPG

The spot faces you see are for RTV Silicone. I'm recommending de-greasing the gun, wipe a very little oil film in each spot face, dab a little RTV in each spot face, and install the rail.

The RTV will not allow the rail to slide during recoil. The clamps are milled at a slight angle where they mount to the optic rail so they give a preload/tight fit on the tube. RTV just prevents the rail from moving. The RTV is rubbed off the tube by hand if you remove the rail. The light oil film will allow you to remove the optic rail so it won't be glued to the tube.

[Dan0341]

very cool

[Barry in IN]

Neat.
Any production plans?

[M60joe]

No production plans. A guy in Ga. asked me to make it. I'll make them per request.

[johnrigby]

I'm the one that has the mount, it is high quality, excellent design , perfect fit on my 76. You can see through to the iron sights when no optics mounted. Planning to put an EOTECH atop. When I'm done I'll post pixs.

[Firecop203]

How much?

[johnrigby]

I finally mounted the bracket , yes I did the ATV glue trick and mounted a EOTECH 551 on it, just came back from the range and the 760 now can chew the center out of a standard siloutte at 25 yds.

[M60joe]

Mark the position of your barrel or your POI might change. (if you remove/reinstall the barrel)

[johnrigby]

I plan to center punch the barrel and find some suitable place on the receiver to punch too. Your mount was key in updating my optics. again nice work.

[class3JB]

Joe you do beautiful work, any thoughts on the uzi ambi safety?

[Brian Ski]

Never looked this post for a 760... That sure does look sweet.. I wonder if that is the same size tube as the K???

Dam, too little time, not enough money!!!

[M60joe]

Originally posted by class3JB
Joe you do beautiful work, any thoughts on the uzi ambi safety?


Sounds like the guy who does amphibians work is going to make them.

http://www.uzitalk.com/forums/showthread.php?threadid=11661

[M60joe]

Originally posted by johnrigby
I plan to center punch the barrel and find some suitable place on the receiver to punch too. Your mount was key in updating my optics. again nice work.

I think welding the barrel nut to the barrel (or using a key to time the barrel to the nut) is a good idea. DAN0341 IIRC said he fixed the nut to the barrel on a barrel I made with a UZI thread adapter on it. It's a good idea.

[johnrigby]

See pix

[az paul]

Very nice, Joe. Please let me know if you are going to make a run.

[M60joe]

Thanks. I've made another one and shipped it. Looks like it will only be as ordered.. no "run" is planed....

[drdremel]

I wish you had made this before I tried many different methods of adding a sight to my 76. I ended up with a new shroud. Yours is clean and nice. How much are they?

[eric rommel]

I mounted an eotech, and it works great. Mine wasnt cut down the middle, it was solid, so I couldnt use my metal sights, But I dont really miss them.If you put it on correctly, its sopposed to come off without problems though I havent wanted to remove it. Still waiting on my suppressor, cant wait to shoot without those big ear muffs. ER

[happycamper]

How 'bout a group buy M60joe? What would the cost be and how many would we need to buy?

[M60joe]

How 'bout a group buy M60joe? What would the cost be and how many would we need to buy?

I've made @13 over the past year and not sure if the demand is still here, but:

5 pcs $98.00 delivered

10 pcs $84.75 delivered

Ohio add 6.5% tax

[happycamper]

Sounds like a deal. I'm going to start a new thread about ordering.