question on trigger pin removal

[proizy2k]

What is the best way to remove the trigger pin and its parts from the trigger frame ?? Removing the sear I have down but am fighting with that d@#$ pin ! Any advice and or pictures showing how to do so would be much appreciated !!
Happy NewYear Everyone !! :shocked
Will C.

[WhisperFan]

What is the best way to remove the trigger pin and its parts from the trigger frame ?? Removing the sear I have down but am fighting with that d@#$ pin ! Any advice and or pictures showing how to do so would be much appreciated !!
Happy NewYear Everyone !! :shocked
Will C.

Make sure the grips are off and the grip safety is all the way to the rear.
I also find it easier to take the spring out from under the disconnector.
Then - there is a notch that needs to line up with the pin. I often have to tap it with a punch to get it started - but it usually comes right out.

[RoverDave]

Check the library here (http://files.uzitalk.com/reference/pages/assemblelower.htm). That might help you. Once you remove the front pin and sear, you can remove the trigger pin by first unhooking the trigger spring legs from the disconnector. Then you can push the trigger pin right out.

[proizy2k]

I got the D@#n pin out . I wish there was a closer picture of the trigger spring assembly how its supposed to look when its ready for reinstall in the trigger housing and when its installed !! Thankyou for your help !
will c.

[proizy2k]

I finally got it figured out after working at it for a few minutes . No more help will be needed now ! Thankyou for the advice and links ,It is much appreciated !!
happy new year !!
WillC.