Crinkle/Powdercoat finish

[MuzzleFlash]

Just got off the phone with Stan's Guns. I want to finish a mount to match his paint on the DLO tube. Here's what he recommends:

Paint: PJ1 Fast Black Wrinkle Paint Mfr. # 16-WKL, 3 coats.

Do not confuse with the VHT Black wrinkle paint made for valve covers and also from PJ1. You want the Yellow & Black can made for motorcycle engines, etc. rated to 500 degrees F.

Do not directly apply paint. Instead spray on a piece of paper and take up with a paint brush. Using the brush, apply thin coat. Wait 5 min or so for it to "flash over". Apply second coat, wait 5 minutes. Apply third coat.

Just passin' it on...

Also thanks to P7M13 for putting me onto this stuff. Here's some online sources:

http://www.usamoto.com/shopping/GOMstore.cgi?user_action=detail&catalogno=UP-PJ16-WKL
http://store.yahoo.com/classic-motoring/pj1coatings.html
.

[Vegas SMG]

Or here for touch up..... http://www.denniskirk.com/jsp/product_catalog/Product.jsp?ovmkt=8FM037RKKF3ISMHR97Q57U0TMO&catId=1&leafCatId=12005&skuId=30299

[P7M13]

Also thanks to P7M13 for putting me onto this stuff.

My pleasure. So much good information is available on forums like these, anytime I can add something positive is simply a pay back for me.