Discussion relating to the UZI firearms family.
I’m excited to announce the availability of my new book - The UZI Submachine Gun Examined. This book covers the entire 65 year history of the UZI, including all model variations, manufacturers, parts identification, accessories, manuals, and much more. It covers both military versions of the UZI as...
Richard from BWE has provided some tuning instructions for the .22LR conversion kits made by Group Industries, Vector and Subgun Ordnance. Check out the information here: http://www.uzitalk.com/forums/showthread.php?72204-22LR-Conversion-Kit-Tuning-Procedures
https://youtube.com/shorts/4W8828XMVGk?feature=share
Looking for more info before I have to sell a limb to get this. I had one of the 3/4x10 threaded barrels for my Uzi but sold it because I didn't want to have to modify a barrel nut to use it- the mac threads are too large for the barrel nut to fit over them. When you look at this barrel it...
I had been in search of one of these for quite a while, so I thought I would share in case anyone else had also been looking. They showed up in stock at Numrich. Mine arrived in what appears to be new condition. https://www.gunpartscorp.com/products/1479130
Hello All: Have 3 drums , 2 vectors that work perfectly and one C&S that shoots one round and does not advance it high enough to let the bolt strip it I havent tried to lube it. Any suggestions? If it still dont work, can anyone tell me who would work on it?
The FAB Defense Aluminum Tactical Tri-Barrel Rail System for Uzi/Mini Uzi does NOT fit on the Vector UZI. Just tried one and figure I'd update everyone that might be looking to upgrade their handguard. As it slides down the barrel it gets caught on the welds on the left and right sides of the...
Hello All: Have some uzi mags I want to know more about Many have a 2 digit number on the back some have the outline of a star but on the side of the mag
Hello Folks! I was curious of everyone's experiences and thoughts of using Black Jack buffers in a IMI UZI full size 9mm SMG.... long-term is it... Good, Bad, or Ugly? Etc. Seen all the great videos of bumped up RPMs some like 900+ etc. Read a few past posts here as well. My main...
Anyone have a low down on where I can get one?
What is a good price for a UZI 9mm carbine. Made by Israel Military Industries. S/n 05xxx new in box.
I have a .22 caliber conversion kit for my full size UZI that I've had for a long time but can't identify it because there are no markings on it . I took it out today and it ran like a top surprisingly enough . How do I ID it and how much is it worth ? I checked in the library and it may be a Group...
Anyone have one?
I have a vector uzi 72 round drum that is just collecting dust. What are these drums worth if I decided to sell? Thanks.
Does anyone know when/if these will be back in stock? got a mckay receiver i'm trying to finish up, but having a real pain trying to find all the parts I need. Alternatively, does anyone know any other places to find a semi-auto bolt?
None of my Uzi mags have any manufacturer’s markings on them other than what appears to be a tooling number stamped at the bottom rear. All but 2 of them are parkerized; the 2 different ones are blued and marked with a “40.” None of the other mags carry that number. The blued ones are also made...
Anyone know who made these? I believe it's an Ace stock adapter for a full size Uzi.
Is the new e form 4 faster than paper. Im purchasing a Micro from an individual in another state that doesn't have an account set up on the ATF site and is not that computer literate. Its going to my SOT and wondering if the e form is faster, and if there is an EZ work around. I watched the...
Finally after a long quest I was able to source the holy grale of Uzi stocks and with it came another one. One with a non-serrated buttplate and one with a serrated buttplate. Don’t know what to do with the second one though. At least for now.
I just got my Uzi back from John Andrewski and he turned a jamomatic into perfection. Before I sent it to him for repairs, I could not run a full magazine though it. He brought it to SMG specs by drilling out trunion, removed barrel restrictor ring, replaced barrel with SMG Barrel, changed sear,...
I never realized there were different versions of the Action Arms hard case until last week. The cases I'm referring to are for the full size Uzi-Model B. I can spot six differences on the inside of each case. I'm curious if anyone knows the backstory on this. I have pictures but can't seem...
Slowly making progress on a build with a Mckay receiver and Mckay bolt. Next is to determine what recoil spring is needed for the bolt. I'm seeing that the full auto recoil spring is needed for the Mckay bolt having tolerances for that spring. Or is the standard semi auto spring needed?
Interested in finding a registered bolt for my UZI Pro, some questions.... Are the Mini and micro UZI bolts the same? My understanding is some machining is necessary to fit a mini UZI bolt into a Micro UZI, also a barrel change is necessary; is this accurate? Can a micro UZI be made to fire from...
I purchased an UZI bayonet a couple of years ago and I had forgot about it until yesterday when I came across it in an ammo box. I bought it just because it went with the UZI so I figured I would pick one up. But, my question is do you think anyone actually ever used them? Seems strange to me. I...
Anyone know what the going price for a Micro UZi folding stock is? I have one but no clue what they sell for.
There are currently 135 users browsing this forum. (6 members & 129 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
