Discussion relating to the UZI firearms family.
I’m excited to announce the availability of my new book - The UZI Submachine Gun Examined. This book covers the entire 65 year history of the UZI, including all model variations, manufacturers, parts identification, accessories, manuals, and much more. It covers both military versions of the UZI as...
Richard from BWE has provided some tuning instructions for the .22LR conversion kits made by Group Industries, Vector and Subgun Ordnance. Check out the information here: http://www.uzitalk.com/forums/showthread.php?72204-22LR-Conversion-Kit-Tuning-Procedures
Interfor USA Group Inc had a table at the Tulsa Gun Show last month. Among other things, they make SA Uzis. They seem to be high quality. Anybody ever shot one? https://interfor.jimdo.com/store/#!/Uzi-SMG-semiauto-clone-9mm/p/116074682/category=0
all but one of my 25's are star of david marked but my 32's have no star. most have various numbers on the bottom of the back spine. im trying to ID what maker of mags i have? using the ID guide on the forum i dont see what i have as an option
New here, just getting started with my semi-auto build. I purchased the 80% repair section to weld the front and rear receiver pieces back on (to retain the markings). I purchased the repair section from us barrel shrouds and everything looks good, but the grip frame is very tight when fitting. I...
ive got what i believe is a gen 2 GI 22 kit. Aluminum bolt, mag has the 2 springs. i have had 0 issues with the bolt...it picks up and extracts just fine...the problem i have is run aways and not going back enough to grab the next round...so ive got a spring problem the back of the spring...
I have a 9mm group industries register bolt and from time to time I was having jamming issues where the bolt would come forward before the empty cartridge would inject out of the gun. When I bought the bolt it came with a different type of recoil spring that wasn’t typical to what you see every...
I wanna see your UZI(s)! I can't get mine for another week or two so I need to see some to tide me over. Any UZI pic you got I wanna see! Help me out!! :)
Kits back in stock follow the link http://www.uzitalk.com/forums/showthread.php?89015-Back-in-stock-Uzi-22-conversions
Sent my Uzi to bwe in January I think back then he said about 10 months. Anyone else send one to him about then that has gotten it back?
What would you own if you could only have one machine gun but you could have anything you wanted? HK M-16 AK M-60 m-240 Sten UZI MAC
I got a wild micro kit in today it has night sights and the folding stock is straight no bend at all and the charging handle is very different. If anyone has any insight if this is cool or crud i would appreciate it, i plan to return it as it is super used and as a kit i give it a poor condition
went to my ffl today, he saw the GI mini i picked up and brought out his lot of parts to compare. He has been sitting on a few GI Mini and full size receivers that he dosent really care to store anymore. What do you guys think this is worth?
Can anyone tell me the difference between the semi mini and semi micro recoil assembly. Thank you
Friend had his Group Industries Vector Arms FA Uzi at the range, had a premature detonation prior to fully chambered 9 mm round...…. 9mm case ruptured, gas back in the face but no one was hurt. Seems like lots of brass shards were blown everywhere. Cleaning them out....The top cover SLOT...
Can't seem to find any SA bolts in stock to complete a kit build. Any tips available?
So I finally got a mini took a long time to find one. I got a vector on a Group HR 4332 receiver. Are the vector minis cut from a full size frame? Thank you
New to the uzi world. Just picked up a Mckay reciever, and parts kit. And sa barrel I cannot find the remaining parts I need. Bolt, firing pin assembly, and sa sear. Anyone have a line on these, or know why they are sold out everywhere!? I think that's all the parts I need...am I...
Truth be told I've owned this full size UZI for many years and just never got around to busting its cherry and don't know if I ever would...so the question asked is what would you want/trade for instead of the UZI to fill the SMG void? I understand many of you would never want to get rid of your...
Hello all, I am new member to the forums, but I have been lurking and reading for quite some time. I’ve done as much research as I could without creating a thread but alas, here I am. I’m hoping someone can help me, I’ve run out of ideas to get my SA Uzi working. I built a Semi Auto Uzi SBR...
heard of yall speak of them before. http://auctions.morphyauctions.com/_N__Highly_Desirable_Original_Curio___Relic_Eligib-LOT448405.aspx
I hear folks complain about the full size Uzi being slow and jerky with the heavy bolt. Has anyone ever played around with making the bolt lighter to address this? Just curious?
Hello, all. I have a build I'm trying to get running and having some trouble. IMI type A parts kit from apex and a McKay receiver. The gun will feed, fire, extract, and eject fine from the right column of the magazine but won't feed from the left column. Bolt to top cover gap is .010 with a...
I thought some of you may be interested in a video about the Argentine FMK-3 SMG I made. This gun takes some inspiration from the UZI, and you can see this in its various features. https://youtu.be/vP_3bv7Bru0
Alright fellas, Now that I knocked out a purchase of an M11/9 a few months ago, I am thinking time to start saving up for a FA Uzi. What should I look for? Bolt guns? Registered receivers? Is it 100 percent that most of the time the bolts are tailored to the host that you buy it in?...
?
Recently I got a slotted Uzi bolt, it came with a vector gun however I wanted to use it in my Model A. So I cut the restrictor ring out of my model A so the bolt would fit and I went to give it a go. Out of the 5 mags I tried I was only able to dump 1 full mag. The other 4 I had a minimum of 3...
There are currently 19 users browsing this forum. (0 members & 19 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
