Discussion relating to the M-10, M-11, and the rest of the MAC/RPB firearms family.
Post'em here, lets see what you've got. I've changed it around once again, so one more picture to come soon.
I cannot find the threads or my links to various web sites for MAC parts and conversion kits, like uppers for the M10/9... Could we please get a tacked thread listing the various places to find MAC stuff? :D
Not to hinder discussions, but a good percentage of post are asking questions that have been covered several times before. I am just as lazy as the next guy so I get that it seems easier to post a question than to search for an answer, however using the search button will give you hours of reading...
I recently purchased a M11/9. It has a grip attached to the barrel. On the 3-lug I believe. I was able to remove the top plate and pin, but not the rest. I tried to remove the plastic grip, but was not able. Maybe I didn't try hard enough. Any advice.
I got the "Your MAX-11A1/15 is ready!" email today. Looking forward to trying it out.
I just learned that vz26 mags will run halfway decent in a 9mm M10 with a new notch for the mag catch. Does anyone have pics and or a measurement for where the notch goes, and are the mags single or double feed? Thanks and I hope everyone's havin a great holiday weekend.
Hello All: Have two C&S Suomi converted drums to Fit M11 or M11 with Large Magwell . I will keep one and sell the other Havent seen any for sale so I wonder what is the going rate for one in nice shape Works flawlessly $700 ?? $1000? Thanks Haris1
Is it just me or would A Mac that takes P90 magazines be awesome?
I haven’t seen any YouTube video postings yet of one, so I assume they arnt out there yet. Obviously eager and don’t want to want to bother the shop.
With my 10-15 on the way, I wanted to start a thread to see who has been successful with different caliber conversions. I plan on a 7.62/39 and 22 conversions. Please post what barrel and gas settings you found to work with your conversions and any other mods you had to add. Also, it would be good...
Is it safe, and if so, what's needed to convert the 11/15a1 from 5.56 to 7.62×39? I have the bolt, barrel, ASC mags, etc lying around in my parts bin. Will the baby mac hold-up to 7.62×39? Thanks
Been awhile since there was a new Lage project, what does everyone think about the new shortened Suomi upper? It's been in demand and been requested. I just hope that demand turns into sales for Mr. Lage. Seems in the NFA world items are mostly appreciated before or after their active production...
We have a large batch of MAX-31C uppers ready for sale. Please check your e-mail to make sure you did not miss a notification. Tomorrow we are contacting people by phone and will then be moving down the list if there is no response.
6 months in the making this project has finally come to the point of which it is worth showing. A dedicated 22lr upper for the m11. Threaded barrel is just short of 4.5 inch so most ammo should stay subsonic, uses Richards 22lr mags, 10/22 extractor, dual 10/22 recoil springs, aluminum receiver,...
In the tradition of this forum, if you can't find one, build one. I know a few others are interested so feel free to share ideas.. this will be an open thread, so if it works it will be a how to for the benefit of Mac owners everywhere.. I've had some ideas knocking around for a while- right now I...
We are finalizing our design for the Tenko 10-16 adapter for the M10 family of RR machineguns. For those of you unfamiliar with the Tenko, it is an adapter as opposed an "upper ". The Tenko adapter will give similar functionality to that of a M16 registered receiver. So a standard AR-15/M16 upper...
On another thread: This was posted on another thread. Instead of posting there and pulling that thread off track, I thought I would make a new thread. Personally, I think that the S.A.B.R.E was half done. Yes, they got a rifle caliber "upper" to get approval. But the thing was seven or...
Update: MAK91's American 180 (New model) Speed Loader Vs E&L loading tray. This is essentially the production model that Mak91 will be offering for sale. GET ONE!
With Vegas’s passing nobody has mentioned future bolt production. I know PS was recently the new point of sale, but nothing said about manufacture. Lot of $$$$$ to spend on each batch per production run, plus who has the CAD files? Did my final production bolt just go up (substantially)...
Help settle this difference of opinion. Have someone wanting my open bolt upper for his semi lower ..I cant see how it can work since the semi auto lower has no way of cocking it when the bolt is retracted. And if there is a way, wouldnt it be illegal since open bolt semis have been not...
I stumbled upon this old thread and was wondering if these rate reducers for the M10 .45/9mm are still being made? If so, where could I get one? What is the fire rate? For how much? And if not, are there any 3D models of them available to 3D print?
So, as I'm sure many of you have seen if you've been following Lage's work, there are videos and pictures from the Max11/15 and Max11a1/15 projects along the way. There is one particular firearm which has intrigued me since seeing it, however. And that is this: At first glance, it...
I think it's time this got its own thread. This seems like a major change, and I for one lack clarity regarding the extent of it's reach. Does this mean we have to send a letter every time we equip a non OEM upper on a Mac receiver? Does this only apply to rifle caliber uppers? If you...
https://www.gunbroker.com/item/936766760 I don't think this is 9mm. Waiting on the seller to get me info on if a round will fit in the chamber. Anyone seen one like this before?
hey guys, anyone have any tips for removing slop? specifically between lage uppers and m11/9 lower.
not mine....and no affiliation https://www.gunbroker.com/item/933028458
Hello MAC-10 Talk! I recently purchased a complete set of upgraded components for a JAWs M-10/.45ACP. I wanted to upgrade it the second that I got it from my dealer; however, I decided not to go through with it because I had to put money elsewhere. With that being said, is there anyway that I...
There are currently 463 users browsing this forum. (12 members & 451 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
