Discussion relating to the M-10, M-11, and the rest of the MAC/RPB firearms family.
I cannot find the threads or my links to various web sites for MAC parts and conversion kits, like uppers for the M10/9... Could we please get a tacked thread listing the various places to find MAC stuff? :D
Post'em here, lets see what you've got. I've changed it around once again, so one more picture to come soon.
Not to hinder discussions, but a good percentage of post are asking questions that have been covered several times before. I am just as lazy as the next guy so I get that it seems easier to post a question than to search for an answer, however using the search button will give you hours of reading...
Saw a blurb about it a couple of weeks ago, e-mailed Jackie, and got on the “list”. Don’t know if this is an interest only list, or for a firm order. Does anyone know for sure if this will really happen, or is it more of a “let’s see what the interest is and maybe decide to go into production” kind...
Sorry if this is not the right place to post this, I'm new here. Anyways, i ordered some Mac 10 parts off of Cobray.com, it's been about a week and a half now, and I haven't heard a single response. I called them and no answer, emailed them and no answer. The order still says processing. Is the...
Like the title says. I was on GB, none, Ruben, none, NFA sales, none, Spiwak, one, Sturm, only one in Jan. Seems to be the hot gun of the month.
My optimism has held me from writing this for quite some time. I need to come clean with where we are with the approval process. We have received a determination from the FATD that the Aluminum version of the Tenko is not only a firearm, but is a machinegun. We originally hired a lawyer whose...
What's the scoop on these? No aftermarket support, but did they run worth anything? Tired of waiting for Lage to do another run of 10/31 uppers at this point and the Tenko and 10-15 appear to be stuck in limbo indefinitely.
Just picked up a Mac 10/9 which has had an UZI magwell conversion done on it (I believe by Practical Solutions). Does that conversion include milling on the bolt? If so, I assume that a Max 10/9 would need to have the bolt milled in a similar fashion since it will be feeding from uzi mags, but a...
Hello, I am in need of some grease gun mags. Does anyone know of a source? Thanks!
Received this as part of a package deal. What types of covers are these? They are some type of foam and slide on and off. They are very effective heat insulators, but are showing some age. I'd like to preserve them if possible, especially if they are worth something. I found another thread...
Recently bought a semi M11A1 and would like to get some quality mags and a muzzle device that I could use to get a decent hold on this piece. Thanks, A
If you missed out on the last Norse Forge ACR stock adapter run for the M10 9/45, I'm about to do another run. I'll update the website and open a pre-order. I should have them shipping by the end of the month. Also, if the PayPal option manages to pop up, please avoid it as PayPal doesn't take...
In the tradition of this forum, if you can't find one, build one. I know a few others are interested so feel free to share ideas.. this will be an open thread, so if it works it will be a how to for the benefit of Mac owners everywhere.. I've had some ideas knocking around for a while- right now I...
Has anyone come up with replacement mags for the Shockwave S31?? I know Soumi 72 Drums and Coffin! Any other?JD
What do you think the value is of an SWD m11/9 that has been covered to use a STEN magwell and has had the slow fire TASK conversion done (including the hole in the backplate)? This would be a local non-dealer transaction for a gun that is in fair/good condition. It seems to me that the STEN...
A buddy is asking about buying some from me and I have no idea what current pricing is. They're all in good functional shape but nothing special. TIA
Just a heads up in case someone else was also looking.
is this where they're at now? https://www.ar15.com/forums/Equipment-Exchange/Lage-m11-22-kit/118-2081379/
Was just wondering if a VMAC45 bolt (closed bolt) was interchangeable and would work in a standard Mac 10? Or would it be incompatible due to the difference of the VMAC45's lower fire group assembly?
It is marked: INGRAM M10A1 CAL. 9MM, 45A.C.P. MILITARY ARMAMENT CORP. STEPHENVILLE. TX. USA I purchased it from someone here without a magazine years ago. I stuck it in the safe and forgot about it until recently. It is a semi auto in...
https://www.youtube.com/watch?v=si7Q6BCPBYg Make it one lower, two uppers.
I recently purchased a M10/9 Police. I was wondering if there was any way to trace the SN to a specific dept, or find out if it was even ever purchased by a dept. There are no obvious rack number markings on it. Sorry if this has been covered, searching the forums didnt come up with anything.
Hoping to get some information. I just added the Stormwerkz Rail and a CT RDS to my Leinad Cobray CM11. It is now a pretty dandy accurate carbine and with a 50 round Shockwave ZMag, even more fun. Does anybody out there know if it is possible to get a threaded replacement barrel so I can use my...
I'm listing a M-10, 45acp SMG for my employer on gunbroker. I took it apart for pictures and ran a patch through the bore. The gun was very clean inside. The bore was found to be smooth. Not like it was worn out but like it was made that way. Has anyone seen that before? The guy we bought it...
who'd a thunk these would be so valuable: https://www.ar15.com/forums/Equipment-Exchange/Cobray-Mac-11-9-Original-Box-and-Foam-Liner/118-2081080/
anyone been able to contact Russell at RPB? Sent emails and left messages but no response and his voicemail box is full. the guy has always been a flake but been able to get some contact in the past.
Happy New Year to be Uzitalk Mac style family. Here's hoping that all those here and those dear to them have a Safe, happy, and prosperous New Year. And to those wanting on a positive determination so they can sell their products, hopefully they will receive them soon. Scott Manager A&S...
There are currently 60 users browsing this forum. (12 members & 48 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
