UZI Talk Forums
+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 20 of 21

Thread: See thru Optic Mount

  1. #1
    FFL 07/02
    UZI Talk Life Member
    M60joe's Avatar
    Join Date
    Mar 2003
    Location
    Ohio
    Posts
    1,578

    See thru Optic Mount

    Use a optic or see thru the optic rail for the peeps.









    The spot faces you see are for RTV Silicone. I'm recommending de-greasing the gun, wipe a very little oil film in each spot face, dab a little RTV in each spot face, and install the rail.

    The RTV will not allow the rail to slide during recoil. The clamps are milled at a slight angle where they mount to the optic rail so they give a preload/tight fit on the tube. RTV just prevents the rail from moving. The RTV is rubbed off the tube by hand if you remove the rail. The light oil film will allow you to remove the optic rail so it won't be glued to the tube.
    Last edited by M60joe; 03-10-2005 at 02:53 PM.

  2. #2
    UZI Talk Life Member
    Dan0341's Avatar
    Join Date
    Dec 2002
    Location
    E. Tennessee (escaped from SoCal)
    Posts
    715
    very cool

  3. #3
    Registered User
    Join Date
    Feb 2005
    Location
    Indiana-west central
    Posts
    104
    Neat.
    Any production plans?

  4. #4
    FFL 07/02
    UZI Talk Life Member
    M60joe's Avatar
    Join Date
    Mar 2003
    Location
    Ohio
    Posts
    1,578
    No production plans. A guy in Ga. asked me to make it. I'll make them per request.

  5. #5
    Registered User
    Join Date
    Feb 2005
    Posts
    10

    76 Mount

    I'm the one that has the mount, it is high quality, excellent design , perfect fit on my 76. You can see through to the iron sights when no optics mounted. Planning to put an EOTECH atop. When I'm done I'll post pixs.

  6. #6
    Registered User Firecop203's Avatar
    Join Date
    Feb 2004
    Location
    Oklahoma
    Posts
    268
    How much?

  7. #7
    Registered User
    Join Date
    Feb 2005
    Posts
    10

    Update on MK760 OPtics mount

    I finally mounted the bracket , yes I did the ATV glue trick and mounted a EOTECH 551 on it, just came back from the range and the 760 now can chew the center out of a standard siloutte at 25 yds.

  8. #8
    FFL 07/02
    UZI Talk Life Member
    M60joe's Avatar
    Join Date
    Mar 2003
    Location
    Ohio
    Posts
    1,578
    Mark the position of your barrel or your POI might change. (if you remove/reinstall the barrel)

  9. #9
    Registered User
    Join Date
    Feb 2005
    Posts
    10

    Barrel index

    I plan to center punch the barrel and find some suitable place on the receiver to punch too. Your mount was key in updating my optics. again nice work.

  10. #10
    UZI Talk Supporter

    Join Date
    Nov 2003
    Location
    florida
    Posts
    242

    compliments to Joe

    Joe you do beautiful work, any thoughts on the uzi ambi safety?

  11. #11
    UZI Talk Life Member
    Brian Ski's Avatar
    Join Date
    Jul 2003
    Location
    Northern Indiana
    Posts
    6,544
    Never looked this post for a 760... That sure does look sweet.. I wonder if that is the same size tube as the K???

    Dam, too little time, not enough money!!!

  12. #12
    FFL 07/02
    UZI Talk Life Member
    M60joe's Avatar
    Join Date
    Mar 2003
    Location
    Ohio
    Posts
    1,578

    Re: compliments to Joe

    Originally posted by class3JB
    Joe you do beautiful work, any thoughts on the uzi ambi safety?

    Sounds like the guy who does amphibians work is going to make them.

    http://www.uzitalk.com/forums/showth...threadid=11661

  13. #13
    FFL 07/02
    UZI Talk Life Member
    M60joe's Avatar
    Join Date
    Mar 2003
    Location
    Ohio
    Posts
    1,578

    Re: Barrel index

    Originally posted by johnrigby
    I plan to center punch the barrel and find some suitable place on the receiver to punch too. Your mount was key in updating my optics. again nice work.
    I think welding the barrel nut to the barrel (or using a key to time the barrel to the nut) is a good idea. DAN0341 IIRC said he fixed the nut to the barrel on a barrel I made with a UZI thread adapter on it. It's a good idea.

  14. #14
    Registered User
    Join Date
    Feb 2005
    Posts
    10

    Completed mount & optic

    See pix

  15. #15
    UZI Talk Life Member

    Join Date
    Jan 2003
    Location
    Arizona
    Posts
    3,896
    Very nice, Joe. Please let me know if you are going to make a run.
    Proudly living in the heart of the infamous "UZI Triangle."

  16. #16
    FFL 07/02
    UZI Talk Life Member
    M60joe's Avatar
    Join Date
    Mar 2003
    Location
    Ohio
    Posts
    1,578
    Thanks. I've made another one and shipped it. Looks like it will only be as ordered.. no "run" is planed....

  17. #17
    Registered User
    Join Date
    Aug 2005
    Location
    Michigan
    Posts
    125
    I wish you had made this before I tried many different methods of adding a sight to my 76. I ended up with a new shroud. Yours is clean and nice. How much are they?

  18. #18
    Registered User
    Join Date
    Oct 2005
    Location
    Pa
    Posts
    48

    Mount

    I mounted an eotech, and it works great. Mine wasnt cut down the middle, it was solid, so I couldnt use my metal sights, But I dont really miss them.If you put it on correctly, its sopposed to come off without problems though I havent wanted to remove it. Still waiting on my suppressor, cant wait to shoot without those big ear muffs. ER

  19. #19
    UZI Talk Supporter

    Join Date
    Nov 2005
    Location
    Texas
    Posts
    263
    How 'bout a group buy M60joe? What would the cost be and how many would we need to buy?

  20. #20
    FFL 07/02
    UZI Talk Life Member
    M60joe's Avatar
    Join Date
    Mar 2003
    Location
    Ohio
    Posts
    1,578
    Quote Originally Posted by happycamper
    How 'bout a group buy M60joe? What would the cost be and how many would we need to buy?
    I've made @13 over the past year and not sure if the demand is still here, but:

    5 pcs $98.00 delivered

    10 pcs $84.75 delivered

    Ohio add 6.5% tax

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts


Please consider becoming an UZI Talk Supporter.