I must Admit, that’s a good looking stick. Prolly the cleanest clone build I’ve seen. The stock makes it.Originally Posted by pakieser
MPA30 side cocking SBR, had a VZ58 stock welded on and 3-lug barrel added. I'd love to go full auto but buying machine guns in MN requires they be C&R.
Somewhat new to the site. I have a transferable SWD that I just started the wait on, so meanwhile I figured I would build a SBR to play around with the lage SK upper while I wait.
The SBR with vz stock mocked up awaiting a buddy to tig weld it
Transferable as it sits now with older Lage slow-fire upper & Rex Silentium MG7K .358
First conjugal a couple weeks ago:
https://youtu.be/YQRcaa9IbHA
Last edited by Romad816; 09-13-2020 at 10:55 PM.
Somewhat new to the site. I have a transferable SWD that I just started the wait on, so meanwhile I figured I would build a SBR to play around with the lage SK upper while I wait.
The SBR with vz stock mocked up awaiting a buddy to tig weld it
Transferable as it sits now with older Lage slow-fire upper & Rex Silentium MG7K .358
First conjugal a couple weeks ago:
https://youtu.be/YQRcaa9IbHA
Tig weld it to what? I'd recommend drilling and tapping the Lage adapter to accommodate the VZ stock. That's what I've done and it gives me more options.
YMMV
That's what I would do... or just weld legs to the stock plate.
Last edited by strobro32; 09-16-2020 at 06:06 AM.
CFW2. Without can. 100% reliable with or without suppressor, previously needed the can to run, final puzzle piece was stiffer extractor spring.
Side note lately sometimes I find harder small rifle primers in pistol ammo brand new. Winchester is the worst for that.
CCI 115grn with soft small pistol primers (silver) have been the gold standard for me. I buy it by the 1k. Right now it’s $299 each, used to be much less, when available at this price currently (I check daily) I buy on the spot, any delay and it’s sold out again for another 2-3 weeks.
Another angle of the Autowerks drum. Works 100% with CFW, stock bolt, but not speed cube.
Notice in the side profile the Suomi body arches above the lower grip level
Max-11A1 Jaws, a cut down Max-11A1 with a 5" barrel and the usual Lage goodies.
Autowerks drum and 31C upper.
Illustrates the different angle set to the AW drum, it’s tilted by design, runs 100%.
M11/9 build with three position folding stock
If we ever forget that we are One Nation Under God, then we will be a nation gone under.-Ronald Reagan
The Mac-uzi
Made using an Uzi front end, barrel and stock.
The clans have united!
Yeah. That’s pretty cool.The Mac-uzi
Made using an Uzi front end, barrel and stock.
Last edited by Hey...; 03-26-2022 at 11:44 PM.
At a buddy’s house today.
Been having a lot of fun with this one. Cry havoc handguard quick change barrel system and MG3 tripod mount.
That thing needs to be belt fed.
Lol. OAL?
Posting Permissions
Reply With Quote
