The official MAC picture thread

[stercraz]

[Vegas SMG]

My first M11/9 from 2000. AutoWerkes upper and K-grip.

[macaholic]

Here's my RPB M11A1 .380 and a few metal mags. It's my favorite.

Very nice combo with the Bowers CAC-9 converted to fit the 380. I would also like to compliment the replacement of the original stock, with the factory M-11/9 as well. You have very good taste in addition to mechanical insight.

[macaholic]

That's a very nice unmolested model 10 in 45 cal equiped with the sionics two stage can. My guess from the receiver pin is the gun is an RPB Mac. Am I correct?

[Glockdude1]

I used a real SMG stock for me MPA .45. I did it all my self, no instructions from the net. The stock does not extend, nor does it open.

The rails were cut down to 1/2"
I used 1 of the cut rails (heated & bent) as a "L" shaped bracket.
I took advantage of the threaded hole under the receiver. MPA does this for a rifle kit, sold to convert any MPA weapon into a rifle.

It took me a good month to finish it. Since I bought it new, I sent the finished stock back to MPA to be parked, to match the rest of the gun. They did it for FREE!!!!! (I paid shipping both ways)

I have a 1 of a kind semi!!!

[Paven]

Please do not make fun of my babies. Not much but they are mines.

Thank you for looking,

Paven

[SC-Texas]

Some video of my MAX-10 in action.

[garandman]

Some video of my MAX-10 in action.

I was glad to see, toward the end of the vid, y'all finally lurnt how to use the front foldy grippy thing.

[SC-Texas]

That front folding thing wasn't folding at all. It was the gun camera. I left the VFG at home.

[garandman]

That front folding thing wasn't folding at all. It was the gun camera. I left the VFG at home.

Well..... SOMEONE was using a VFG at the end there.

Cool gun cam, tho.

[SC-Texas]

OK, I'm being forgetful. I obvisouly had the VFG, but that was takenoff to attach teh gun camera. I had to watch the video again.

[Vegas SMG]

I'd like to see a photo of the camera attached to the gun please.

[garandman]

Other observations of teh vid -

1. Nice multitasking - smoking a Cuban while smoking a target.

2. That right hand steel plate has an image of a one-eyed Hitler with a flattop haircut on it.

[Paven]

This is a new addition to the family. Courtesy of Mr. Lage. Thank you sir.

[Zack3g]

Here's my 3000+rpm m11/9


right now it's turned down to 1600 or so rpm, to conserve ammo.


For those of you who haven't seen it, this is what a little over 3000 rpm looks and sounds like:

[paul45120]

Here's my modest collection of MAC stuff
[IMG][/IMG]

[Glockdude1]

paul45120

I like the M16 stock on the upper right. Does it shoot good with the Mac?

[paul45120]

paul45120

I like the M16 stock on the upper right. Does it shoot good with the Mac?

Both of the AR stocks work well. I prefer the CAR stock though. It allows me to keep my arms tucked in tight for more control.

[Stellar Rigs]

My favorite is the little .380

I welded a weaver rail behind the cocking knob and put a see-thru mount on to get the laser up over ANY can. A little mill work at the muzzle and finally I smoothed out all the rough welds B4 having the whole thing parked and darkened in hot blue. I like the way it came out so much that I carry it concealed from time to time.

[KingTiger]

Just got everything to play well together a couple of weeks ago. Thanks for all the suggestions & help guys!
[IMG][/IMG]
[IMG][/IMG]