UZI Talk Forums
+ Reply to Thread
Page 3 of 3 FirstFirst 1 3
Results 41 to 54 of 54

Thread: Uzi brass catcher

  1. #41
    Administrator
    RoverDave's Avatar
    Join Date
    Dec 2002
    Location
    ND
    Posts
    15,956
    I didn't think a spitfire could get any uglier, but I was wrong!
    Looking for the definitive reference book on UZI history and technical information? Check out my book The UZI Submachine Gun Examined. Details to order a copy are here.

  2. #42
    Registered User
    Join Date
    Apr 2007
    Posts
    1,626
    To reduce or prevent brass bouncing back in to the action from a hard case catcher, see U.S. Patent No. 6,836,991 (which is now expired). I modified an E&L hard plastic catcher for an HK 91 similar to that design and just put the wedged foam piece on the wall directly across from the ejection port, not on all the walls. Works well for me.

    For the Uzi I use a M16/AR-15 mesh bag mounted "backwards" - with the Velcro strap behind the rear sight around the (folding steel) stock. I have a bunch of small rare earth magnets slid around the inside of the fabric on the bag wire to stabilize the bag against the of the receiver. Also works well for me.

    YMMV, etc.

    Best of luck to all, whatever you decide.