About to do another M10 ACR Stock Adapter Run

[ZeroCool]

If you missed out on the last Norse Forge ACR stock adapter run for the M10 9/45, I'm about to do another run. I'll update the website and open a pre-order. I should have them shipping by the end of the month. Also, if the PayPal option manages to pop up, please avoid it as PayPal doesn't take kindly to these sales.

https://norse-forge.com/products/m10-acr-stock-adapter

*** Note: On this run the mounting prongs will be notchless and the mounting hardware will be slightly different. This decision was made in order to create better fitment across manufacturers and is similar to some other stock mounting designs on the market that have utilized notchless prongs ***

[hkg3k]

Notchless prongs are fine with me.

My disappointment with the Zhukov stock adapter is that it didn't come with a bushing for the hex screw. The diameter of the button head is smaller than the hole in the M11/9 receiver. I had to go to the hardware store to pick up some washers. Was this intentional or an oversight?

I see you're providing the screw bushing for the M10 ACR Stock Adapter?

[ZeroCool]

Notchless prongs are fine with me.

My disappointment with the Zhukov stock adapter is that it didn't come with a bushing for the hex screw. The diameter of the button head is smaller than the hole in the M11/9 receiver. I had to go to the hardware store to pick up some washers. Was this intentional or an oversight?

I see you're providing the screw bushing for the M10 ACR Stock Adapter?

I was under the impression that the hole diameter was different than the M10's if that's not the case, I'll get a bushing sent out to everyone who ordered one. Thank you for bringing that to my attention. I don't currently own an M11 so this feed back is extremely useful.

[b_saan]

FYI if anyone needs an ACR folding stock to go with the new run of adapters, I have an extra NIB as I forgot I'd ordered it from 2 places and 1 was on a backorder that I forgot to cancel. PM.

[hkg3k]

I was under the impression that the hole diameter was different than the M10's if that's not the case, I'll get a bushing sent out to everyone who ordered one. Thank you for bringing that to my attention. I don't currently own an M11 so this feed back is extremely useful.

The hole for the stock latch for the M11, M11/9 and M10 is all the same: ~0.400...give or take 0.005

Please send out the bushing for the Zhukov adapter.

[Hey...]

Beautiful work. Easy to admire.

I need to hurry up and get a CNC mill. Life is too short.

[Quake Guy]

what is shortest LOP possible?

[Slaine777]

Any update on this?

[stoyan79]

I've got an extra M10 ACR Stock Adapter from the latest run that I won't be using. Jordan is out and unsure if he would do another run.
$200 shipped.

[har1340]

I've got an extra M10 ACR Stock Adapter from the latest run that I won't be using. Jordan is out and unsure if he would do another run.
$200 shipped.

Nice MAC Sir...

[No. 6]

Is this only for the M10 or can it work on a M11/9?

[stoyan79]

Only Mac 10.

Is this only for the M10 or can it work on a M11/9?

[Kursk]

Could you do a run again for the M11/9?

[No. 6]

^^
What he said.

[sparky923]

^^
What he said.

This

[Fusion1944]

Stoyan 79 do you still have the extra m10 adapter available?

[alexmg2420]

Could you do a run again for the M11/9?

Could you also do the exact opposite? Zhukov stock for the M10?

IMO, the Zhukov looks sleeker and it's half the price of the ACR stock. Surely it's lighter, too.

[Fishman]

Who are you talking too? ZeroCool is gone.

FYI: I have a mac m10 ACR adapter with a black ACR stock. Unused. $700

[Grant435]

Who are you talking too? ZeroCool is gone.

FYI: I have a mac m10 ACR adapter with a black ACR stock. Unused. $700

By “gone” do u mean out of business or just not currently on forums?

[Grant435]

Also, is he still planning on making 7.62 fat 47 upper? Really curious since I’ve been seeing couple company’s bringing rifle caliber upper to market.