UZI Talk Forums
+ Reply to Thread
Results 1 to 4 of 4

Thread: Any favorite loads for the m11/9?

  1. #1
    Registered User CapnMorgan's Avatar
    Join Date
    Jul 2017
    Location
    Campbell, Oh
    Posts
    84

    Any favorite loads for the m11/9?

    I cast 124gn rn and buy copper plated 115s in bulk. Looking for a clean reliable load. And a powder that meters good from the hornady ap.

  2. #2
    Moderator
    FFL/SOT
    UZI Talk Life Member
    chili17's Avatar
    Join Date
    Jun 2003
    Location
    North Texas
    Posts
    6,109
    Out of a standard upper or out of a Lage, CFW bolt? I ask because I tend to run lighter loads out of a stock upper and bolt. Barrel length comes to play too. Bullseye is cheap and clean out of longer barrels, but in pistol length barrels it is dirty.
    Chris Hipes
    Hipes Consulting Services LLC
    FFL/SOT 07/02
    poulan10takethisoutsoidonotgetmorespam@yahoo.com
    North Texas

  3. #3
    UZI Talk Life Member
    TheColtCollector's Avatar
    Join Date
    Jun 2015
    Location
    Valrico, FL
    Posts
    781
    CFW bolt - 147 gr flat nose powder coated lead bullet sized to .355 with 3.4 gr titegroup

  4. #4
    Registered User CapnMorgan's Avatar
    Join Date
    Jul 2017
    Location
    Campbell, Oh
    Posts
    84
    I'm looking for a lighter load for the stock upper. I have a nice load for my 9mm AR with blue dot but it's very dirty in my M11. I also have a nice powerpistol load worked up, it's clean but kinda hot, M11 cycles noticeably faster. I like wsf for subsonics but it doesn't meter well from my ammo plant and It has to be near the max book load to cycle, I found random flattened primers in the load that was finally reliable so I abandoned wsf for use in progressive.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts


Please consider becoming an UZI Talk Supporter.