UZI Talk Forums
+ Reply to Thread
Results 1 to 5 of 5

Thread: Galil Hammer Removal and Reinstallation Guide?

  1. #1
    Registered User
    Join Date
    Feb 2009
    Posts
    64

    Galil Hammer Removal and Reinstallation Guide?

    Is there a video or tutorial as to how to remove and reinstall the hammer on a semi-auto Galil? I thought it held in place by a cross pin and spring but there also appears to be a small "C" clip that keeps the pin from being removed.

    There are a number of AK video tutorials that I found but those rifles don't have the "C" clip on holding this pin in place.

  2. #2
    Registered User
    Join Date
    Apr 2019
    Location
    Florida
    Posts
    23
    C-clips, e-clips, and hitch pins are just alternate methods of retaining the FCG pins.

  3. #3
    UZI Talk Life Member
    boscoman's Avatar
    Join Date
    Aug 2006
    Location
    Harpers Ferry, WV
    Posts
    1,962
    https://www.youtube.com/watch?v=JVNcsxE91HU

    Try this one. it might help. If you put "galil trigger assembly" into You Tube search there are a number of videos that may have what you need.
    "Good people sleep peacefully in their beds at night, only because rough men stand ready to do violence on their behalf."

    Courage is not a lack of fear, but one's ability to overcome it.

  4. #4
    Registered User
    Join Date
    Feb 2009
    Posts
    64
    That’s a good video. I may have missed the part about the c clip removal and installation. What’s the best way to try to remove that small clip?

  5. #5
    Registered User
    Join Date
    Aug 2006
    Posts
    100
    90 degree scribe

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts


Please consider becoming an UZI Talk Supporter.