UZI Talk Forums
+ Reply to Thread
Results 1 to 7 of 7

Thread: Suomi 9mm stripper clips

  1. #1
    Registered User
    Join Date
    Apr 2020
    Posts
    21

    Suomi 9mm stripper clips

    Looking for a source to buy Suomi 9mm stripper clips?
    Any help is appreciated.
    Steve

  2. #2
    Registered User
    Join Date
    Jan 2004
    Location
    Mesa AZ
    Posts
    159
    I sell them $5 a piece. Thanks Scott

  3. #3
    Registered User
    Join Date
    Apr 2020
    Posts
    21
    Evening; I would be interested in 10 if you want to sell that many?

    Thank You: Steve
    eganjan@hotmail.com

  4. #4
    Registered User Uncle Billy's Avatar
    Join Date
    Aug 2020
    Location
    Cleveland, Ohio
    Posts
    68
    or, you can make your own by bundling 5.56 stripper clips, it's what I did. grind off the little bumps on the edge of the clips, J-B weld them together, put them in a jig, back side up so they tight, then take 2 strips of 28ga sheet metal metal epoxy them top and bottom, weigh them down with something heavy, I use a full ammo can, wait for it to cure, then cut it down to size for it to fit in the loader,,,,,,,,,,,

    https://www.youtube.com/watch?v=LgYKelPwSIk
    Last edited by Uncle Billy; 09-20-2020 at 07:58 PM.

  5. #5
    Registered User
    Join Date
    Apr 2020
    Posts
    21
    Evening; Thank you for your information and the link!!

    Steve

  6. #6
    Registered User Uncle Billy's Avatar
    Join Date
    Aug 2020
    Location
    Cleveland, Ohio
    Posts
    68
    forgot to add you will have to straighten out the clips before proceeding to ganged. they have a slight curve to them, I just took a hammer and GENTLY, VERY GENTLY taped the back center of them to straighten them out. you don't need to get all gorilla on them just slight taps

  7. #7
    Registered User
    Join Date
    Apr 2020
    Posts
    21
    Thank you!!

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts


Please consider becoming an UZI Talk Supporter.