UZI Talk Forums
+ Reply to Thread
Results 1 to 13 of 13

Thread: M11/nine Barrel alignment

  1. #1
    Registered User
    Join Date
    Aug 2012
    Posts
    46

    M11/nine Barrel alignment

    How can I adjust barrel alignment? My OEM upper is not closing on the rounds with my CF -W9mmA bolt. It will close if you slam it but gets jammed and leaves marks on an empty case head the barrel needs to go up.The bolt works fine in all other uppers and the OEM works with the OEM bolt. Can it be fixed? It won't run at all with the OEM upper and the W bolt.
    Last edited by donkeyslayer; 03-28-2021 at 07:36 PM.

  2. #2
    Registered User theduke's Avatar
    Join Date
    Mar 2012
    Posts
    565
    Is the bbl pinned or has it been changed..?

    If not pinned is it tight?

    A pic of trunion area or inside may help.

  3. #3
    UZI Talk Life Member

    Join Date
    Mar 2006
    Location
    Southern New Hampshire
    Posts
    2,190
    The only up or down is how the trunnion is aligned with the upper. I know Sam can fix that, but I don't know what it would cost.

    Scott

  4. #4
    Registered User theduke's Avatar
    Join Date
    Mar 2012
    Posts
    565
    My only thoughts were the bbl was crossthreaded somehow or the upper had been blowed up.

  5. #5
    Registered User
    Join Date
    Aug 2012
    Posts
    46
    The barrel is tight and pinned. I do think it is as it was from Cobray.

  6. #6
    UZI Talk Life Member
    Hey...'s Avatar
    Join Date
    Apr 2016
    Location
    Atlanta
    Posts
    2,917
    What mags? PAM2 release later and need to be modded.

    Could be feed ramp.

    Pics?

  7. #7
    UZI Talk Life Member
    Hey...'s Avatar
    Join Date
    Apr 2016
    Location
    Atlanta
    Posts
    2,917
    I had to adjust the feed ramp on mine (and everything else, literally) to get 100%.

  8. #8
    Registered User
    Join Date
    May 2014
    Posts
    106
    While we are at it, how do you adj the feed ramp? Strip the internals and just bend the feed ramp? Pliers? A little at a time?

  9. #9
    UZI Talk Life Member

    Join Date
    Apr 2007
    Location
    Louisana
    Posts
    1,723
    Crescent wrench and a little at a time.

  10. #10
    Mr. Miata
    UZI Talk Life Member
    Jmacken37's Avatar
    Join Date
    Nov 2005
    Location
    SE MI
    Posts
    4,710
    Quote Originally Posted by cajun 22 View Post
    Crescent wrench and a little at a time.
    Yep...this thing...



    Don't use the first thing you grab like I did!
    AWWWW NUTS!

    REAL MEN DRIVE MIATAS

  11. #11
    UZI Talk Supporter
    Mackjack's Avatar
    Join Date
    Jul 2017
    Location
    Wisconsin
    Posts
    1,710
    I had an upper like that on my m11/9 I just put it upside down in my press and put a socket on top of the chamber ish area of the barrel for maximum leverage and pressed down on the socket. Works like a champ now.

  12. #12
    UZI Talk Life Member
    Vegas SMG's Avatar
    Join Date
    Mar 2003
    Location
    Las Vegas, Nevada
    Posts
    14,494
    Barrel alignment is much like making sausage. The end result is good, but you may not want to know how itís made.

    First secure upper by locking the trunnion in a vise. Insert a rod into the barrel and bend in the direction required for correct alignment. You wonít need much effort to get you going and it really is that simple.
    Please visit my FB page for the latest CF-W bolt information.
    https://www.facebook.com/VegasSMG/?ref

  13. #13
    Registered User
    Join Date
    Aug 2012
    Posts
    46
    Thanks.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts


Please consider becoming an UZI Talk Supporter.