UZI Talk Forums
+ Reply to Thread
Results 1 to 8 of 8

Thread: 3/4x10 to 7/8x9 Thread adapters to use M10 45 can on M10 9mm

  1. #1
    Registered User
    Join Date
    Jul 2005
    Posts
    43

    3/4x10 to 7/8x9 Thread adapters to use M10 45 can on M10 9mm

    Looking for an adapter so I can run my 45 can on a PS 9mm upper I just got in.

    US Machinegun has two adapters = one for MACs 9mm-to-45 and one for TEC-9 to 45

    The MAC one is Out of Stock and the TEC-9 unit is in stock - Will the TEC-9 unit work on an M10/9? I

    http://usmachinegun.com/proddetail.php?prod=TA-T9245

    Edited to Add: I think the TEC-9 adapter is too short to accommodate the M10/9 barrel length (the TEC-9 s shorter distance to the muzzle past the coarse threads) Any leads on a thread adapter that would work is deeply appreciated.
    Last edited by cherenkov; 04-01-2021 at 11:53 AM.

  2. #2
    Registered User Deerhurst's Avatar
    Join Date
    Apr 2020
    Location
    Oregon
    Posts
    230
    I threaded my OE barrel 5/8-24 in front of the pipe threads and machined a "thread protector" that gives me a decent shoulder for the can. I can get you photos this evening

  3. #3
    Registered User
    Join Date
    Apr 2014
    Posts
    611
    I've been wanting one of these as well.

  4. #4
    Registered User
    Join Date
    Feb 2020
    Posts
    68
    Bowers will have what you need.

    https://bowersgroup.com/product/mac-adapter/

  5. #5
    Registered User LawBob's Avatar
    Join Date
    Jul 2009
    Location
    Texas
    Posts
    3,336
    Quote Originally Posted by Deerhurst View Post
    I threaded my OE barrel 5/8-24 in front of the pipe threads and machined a "thread protector" that gives me a decent shoulder for the can. I can get you photos this evening
    Double headed Eddie

  6. #6
    Registered User
    Join Date
    Jun 2020
    Posts
    50
    Quote Originally Posted by Deerhurst View Post
    I threaded my OE barrel 5/8-24 in front of the pipe threads and machined a "thread protector" that gives me a decent shoulder for the can. I can get you photos this evening
    I had Practical Solutions do much the same for me. They do good work.

  7. #7
    Registered User Deerhurst's Avatar
    Join Date
    Apr 2020
    Location
    Oregon
    Posts
    230
    Crap. Forgot to get a photo. Rasslin hogs tonight for a buddy so I'll see what I can make happen.

  8. #8
    Registered User Deerhurst's Avatar
    Join Date
    Apr 2020
    Location
    Oregon
    Posts
    230
    Derp.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts


Please consider becoming an UZI Talk Supporter.