UZI Talk Forums
+ Reply to Thread
Results 1 to 1 of 1

Thread: Full Size Uzi Receiver Alignment

  1. #1
    Registered User
    Join Date
    May 2021

    Full Size Uzi Receiver Alignment

    I am gathering the needed pieces to build an uzi but the Jigs for welding are being elusive. I found a 3D printed version of RTG's jig but want to double check alignment. I found an alignment bar made by Cajun Country that is also no longer available but could make something similar on my own lathe.

    Name:  DSC_0349-768x512.jpg
Views: 149
Size:  116.9 KB

    From my understanding of the description of the bar is that the center line of the trunion, feed ramp and the stock screw are the same. Ive been studying the dimensioned drawings and can confirm that they are the same from the top view but the side view is not definitive.

    Can someone confirm that the the center line of these part are the same?

    Last edited by zta414; 05-12-2021 at 11:37 AM.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Please consider becoming an UZI Talk Supporter.