UZI Talk Forums
+ Reply to Thread
Results 1 to 3 of 3

Thread: New problem…

  1. #1
    Registered User Shattered's Avatar
    Join Date
    Oct 2007
    Location
    North Coast
    Posts
    2,254

    New problem…

    While shootin’ the lil’ darling yesterday, the magazine fell out. Never happened before. I t WAS tight but one of the shooters must have bent something back too far. It just isn’t tight to the mag well anymore. Now I know bending it is most likely the solution, but I also know that spring steel doesn’t like to be bent. Has anyone had this problem before I go gunsmifing on my own and ball something up?

  2. #2
    UZI Talk Life Member
    skoda's Avatar
    Join Date
    Mar 2010
    Posts
    469
    I had something similar on a different gun but a flat spring like the Reising, I just bent it a very little at a time, test, repeat but a little bit more, etc. You probably don't need much of a change from where you are at now.

  3. #3
    Registered User Shattered's Avatar
    Join Date
    Oct 2007
    Location
    North Coast
    Posts
    2,254
    Ripped it apart, all it was, was a loose screw…just like me. Also tapped in the mag well pins and tightened up everything down below. Gun is running great. Blasted some targets at close range, kinda horrific how the 45s just demolish everything. Shoulda fixed this gun 30 years ago….

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts


Please consider becoming an UZI Talk Supporter.