UZI Talk Forums
+ Reply to Thread
Results 1 to 6 of 6

Thread: Max11/15

  1. #1
    UZI Talk Life Member

    Join Date
    Jul 2011
    Posts
    71

    Max11/15

    I shot my max11/15 IRM yesterday. While reassembling I had a hard time getting the bolt to close. It would stay in the locked configuration. I read the Manuel but I just couldn't get it to close. I assembled it so long ago I forgot how I did it. Any help appreciated. Thx

  2. #2
    UZI Talk Life Member
    m11stuff@hotmail.com's Avatar
    Join Date
    Nov 2004
    Posts
    2,005
    Pull the bolt back all the way past the sear to release the bolt latch. Also, make sure you do not have the Internal Gas Block installed.
    Richard Lage
    Lage Manufacturing, L.L.C.
    www.max-11.com

  3. #3
    UZI Talk Supporter

    Join Date
    Oct 2012
    Location
    Indiana
    Posts
    110
    If you have inadvertently bent your bolt latch out of specification then it won’t drop out of the hole in the bottom of the bolt when pulled back.

  4. #4
    UZI Talk Supporter

    Join Date
    Dec 2020
    Posts
    31
    Quote Originally Posted by Aim4fun View Post
    If you have inadvertently bent your bolt latch out of specification then it won’t drop out of the hole in the bottom of the bolt when pulled back.
    This is good advice. I check mine after every use now, once mine bent to far the other way and the latch and spring almost got away from me.

  5. #5
    UZI Talk Life Member

    Join Date
    Jul 2011
    Posts
    71
    Thx for advice I’m sure I did something dumb.

  6. #6
    UZI Talk Life Member
    zipakna's Avatar
    Join Date
    Jun 2011
    Location
    Virginia Beach Virginia
    Posts
    1,678
    do not have a 9mm mag in it either..

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts


Please consider becoming an UZI Talk Supporter.