UZI Talk Forums
+ Reply to Thread
Results 1 to 4 of 4

Thread: What is involved in bringing a IMI converted UZI up to SMG specs?

  1. #1
    UZI Talk Supporter
    ferndog1's Avatar
    Join Date
    Mar 2007
    Location
    South West PA
    Posts
    605

    What is involved in bringing a IMI converted UZI up to SMG specs?

    What is involved in bringing a IMI converted UZI up to SMG specs?

    So all SMG parts interchange.

  2. #2
    Registered User
    Join Date
    Sep 2018
    Posts
    37
    SMG Trunnion, SMG feed ramp, grip lug opening reduction to 8mm via sleeve, and enlargement of receiver sear openings to accommodate a SMG sear.

  3. #3
    UZI Talk Life Member
    amphibian's Avatar
    Join Date
    Dec 2002
    Location
    FL
    Posts
    4,323
    article in the library here: http://www.uzitalk.com/reference/pag...onversions.htm

    Although I wouldn't go back to the stamped sheet metal SMG ramp as they don't feed as well as the 'semi' ramp

    Do like the one on the right. Where the barrel restrictor ring was machined off but ramp retained.


  4. #4
    UZI Talk Supporter

    Join Date
    Dec 2002
    Location
    South Sioux City, NE
    Posts
    756
    Assuming your bolt blocking bar has already been removed and the manuf. did not slot the bolt, you can do everything else. You can even have the markings re-done as you want with exception of the receiver serial number.
    Class 3 shooters blow thier loads faster and with only 1 pull of the trigger

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts


Please consider becoming an UZI Talk Supporter.