UZI Talk Forums
+ Reply to Thread
Results 1 to 7 of 7

Thread: Mini UZI blueprints or measurements?

  1. #1
    Registered User
    Join Date
    Sep 2004
    Posts
    809

    Mini UZI blueprints or measurements?

    Got a new Primeweld TIG AC/DC machine and am now confident enough in my welding skills to tackle a Mini UZI build using a repair section and some pieces of a kit. Many years ago I purchased a couple stripped mini semi bolts and a bbl when someone was selling them cheap, might as well use them, right?

    Was studying the "mini from a full size" article in the library and noticed the author states all the dimensions on the receiver are indexed off the ejector rivet hole. Then he has a few dimensions listed, none of which index off the rivet hole!

    Anybody got the blueprints for the mini receiver, or even just some dimensions superimposed over a photo? I can get by with what's in the article but more info is always better.

    Probably build as a pistol as the OEM folding stock is hard to find and costs more than my car did if you can find one for sale. Any prints for one of those?

  2. #2
    Registered User NorincoKid's Avatar
    Join Date
    Nov 2012
    Location
    Spring Hill, FL
    Posts
    60
    Not entirely sure the best way to do all that.

    I'm collecting parts for a mini as well, and my plan was to;

    Use the GMT Mini Top Cover to dictate space between the front and rear stubs, lining up the ejection port on the repair section with the flare of the top cover.

    Thats how I did my full size and it has zero issues. Took a lot of clamps (no fancy jig) but it wasn't bad at all.

  3. #3
    Registered User
    Join Date
    Sep 2004
    Posts
    809
    I've got a few spare full size top covers, when some vendor is clearancing them out for $3 each you throw a few in your cart! Was planning on doing like the author of the DIY page did and do a cut and reweld. If it looks too crappy I may splurge and buy the commercially made one.

  4. #4
    Registered User rentprop1's Avatar
    Join Date
    Apr 2006
    Location
    West Central Florida
    Posts
    650

  5. #5
    Registered User
    Join Date
    Dec 2017
    Posts
    9
    I have a bunch of dimensions I pulled off an IMI mini SMG as well as a Vector Mini. Send me a DM and I'll try and send you my drawings.

  6. #6
    UZI Talk Supporter
    root's Avatar
    Join Date
    Jan 2003
    Posts
    3,379
    http://uzitalk.com/reference/pages/buildminiuzi.htm

    Built and runs.

    I did one off of these instructions using the same shell but a RTG 80 should work the same zince you are chopping and cutting like we did or vector dix when they did their FS to min transferable conversions.

  7. #7
    Registered User
    Join Date
    Sep 2004
    Posts
    809
    I'm not using the FS repair section, I'm using the mini specific one. Just the center, you still have to weld on the trunnion and rear section.

    https://bwefirearms.com/product/mini...epair-section/

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts


Please consider becoming an UZI Talk Supporter.