UZI Talk Forums
+ Reply to Thread
Results 1 to 5 of 5

Thread: Am I missing something

  1. #1
    UZI Talk Supporter
    smg-45's Avatar
    Join Date
    Aug 2006
    Location
    Virginia
    Posts
    1,232

    Am I missing something

    A friend inherited a PPsh 41 from his Father-in-law. It includes the 68 amnesty paperwork. it was registered as a dewat by having the barrel plugged, and removing the firing pin. After a lot of delays from the ATF, he finally has it registered on a Form 5. He has been told by the NFA branch that the gun cannot be Reactivated. I don't if he talked to the person that answers the phone or an actual Examiner but I believe this is bad info.
    Life is like a jar of jalapenos. What you do today can burn your ass tomorrow!

  2. #2
    Registered User
    Join Date
    Sep 2004
    Posts
    846
    NFA branch needs to read their own handbook.

    https://www.atf.gov/firearms/docs/un...er-10/download

    10.1.5.1 Reactivation of DEWATS. Deactivated War Trophy (DEWAT) firearms may be
    returned to a serviceable condition. A DEWAT that has been returned to a serviceable condition
    (or reactivated) is often referred to as Reactivated War Trophy (REWAT). The act of returning a
    DEWAT to a serviceable condition is considered the “making” or “manufacturing” of a firearm
    by ATF. The procedures for reactivation by a non-FFL or FFL with other than a manufacturer’s
    SOT status or with no SOT status on Form 1 are found in section 6.6 of the handbook. The
    procedures for reactivation by an FFL with SOT status as a manufacturer are found in section
    7.3.3 of the handbook.



    https://www.atf.gov/firearms/docs/un...ter-6/download

    Section 6.6 Reactivation of a registered unserviceable NFA firearm. The Form 1 may be used to
    reactivate a properly registered unserviceable firearm, including registered unserviceable machineguns.
    Block 4(i) of the form should indicate that a registered unserviceable weapon is being reactivated. The
    remainder of the form should be prepared and submitted with the making tax in the same manner as
    described above except that a law enforcement certification is not required. The existing serial number
    on the unserviceable firearm should be used. If the reactivation will be performed by a Class 2
    manufacturer, see Chapter 7 for additional information.

  3. #3
    UZI Talk Life Member

    Join Date
    Mar 2006
    Location
    Southern New Hampshire
    Posts
    2,512
    I believe it was around 2005 that a NFA Branch employee told me, over the phone, that I could file a Form 1 to "make" and register a machinegun. Once the PPsH 41 is transferred to you, activate the gun as posted above. Congratulations, on the transfer. Since it is an original gun, I would be sure that the reactivation was done as carefully as possible.

    Scott

  4. #4
    Registered User MG34_Dan's Avatar
    Join Date
    Jun 2008
    Location
    Austin, TX
    Posts
    574
    I reactivated my 1917A1 with no issues whatsoever.




  5. #5
    UZI Talk Life Member
    Hey...'s Avatar
    Join Date
    Apr 2016
    Location
    Atlanta
    Posts
    3,177
    ^ very cool to see. Thanks for posting.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts


Please consider becoming an UZI Talk Supporter.