Will Lage Upper work with...

No Bananas · 11-06-2009, 11:21 PM

Hi There,
On a M10/9
will the Lage M10 Max upper work with an M10/9 lower that's been converted to take Uzi mags by Practical Solutions?

**FOZ** · 11-06-2009, 11:31 PM

yes

just tell lage when you order.

FOZ

piratesover40 · 11-06-2009, 11:32 PM

Quote:

Originally Posted by No Bananas

Hi There,
On a M10/9
will the Lage M10 Max upper work with an M10/9 lower that's been converted to take Uzi mags by Practical Solutions?

Don't see why not ask Richard

m11stuff@hotmail.com

LawBob · 11-07-2009, 10:18 AM

Quote:

Originally Posted by No Bananas

Hi There,
On a M10/9
will the Lage M10 Max upper work with an M10/9 lower that's been converted to take Uzi mags by Practical Solutions?

It should b/c there's no difference in the bolt where it loads the bullets. He just adds a bolt weight to the top that cantilevers over the barrel (that's why the upper is taller and longer).

Be sure to tell him whether you are single feed or double-feed mags (I don't know whether the uzi mags are single or double).

srv656s · 11-07-2009, 11:08 AM

Yes. The bolt needs to be modified slightly. I sent mine to Sam at Practical Solutions to do the work.

LGustin · 11-07-2009, 12:18 PM

yep, mine works just fine.

11-06-2009, 11:21 PM	#1
No Bananas Registered User Join Date: Dec 2008 Posts: 1 iTrader: 0 / 0%	Will Lage Upper work with... Hi There, On a M10/9 will the Lage M10 Max upper work with an M10/9 lower that's been converted to take Uzi mags by Practical Solutions?

11-06-2009, 11:31 PM	#2
FOZ UZI Talk Supporter Join Date: Sep 2006 Location: NOT OMAHA NE Posts: 1,182 iTrader: 6 / 100%	yes just tell lage when you order. FOZ __________________ All it takes for evil to triumph is for good men to do nothing.

11-07-2009, 12:18 PM	#6
LGustin FFL/C&R UZI Talk Supporter Join Date: Feb 2003 Location: Arkansas Posts: 947 iTrader: 41 / 100%	yep, mine works just fine. __________________ Lonnie Gustin - Van Buren, Arkansas

11-07-2009, 11:08 AM	#5
srv656s Registered User Join Date: Feb 2009 Posts: 30 iTrader: 0 / 0%	Yes. The bolt needs to be modified slightly. I sent mine to Sam at Practical Solutions to do the work.