Search results

  1. R

    Factory UZI SMG

    I have a factory full size Uzi and a factory Mini Uzi. Both were pre-sample guns reclassified by ATF to transferable. Prior to the reclassifications, you could buy a factory full size Uzi but the last one I saw about 5-7 years ago sold at auction for $55K. They were rare and expensive. I...
  2. R

    What would be the approximate current value of a new BarrelXChange Mini Uzi heavy bolt (for a...

    What would be the approximate current value of a new BarrelXChange Mini Uzi heavy bolt (for a factory IMI Mini Uzi)? Thanks.
  3. R

    Wolff Spring Uzi 32 RD Cut Down for 25 RD Magazine

    I did as follows: "It sounds like 16 coils may be correct for the 25 round magazines. Regardless of length of the spring, the coil count multiplied by the wire diameter will give you the solid height of the spring. The Uzi springs from us use 0.052 wire and approx 17.5 coils which would give a...
  4. R

    Wolff Spring Uzi 32 RD Cut Down for 25 RD Magazine

    I've got an original IMI stamped 25 round magazine for my factory IMI Uzi SMG (which runs flawlessly), and it's got 16 coils. Most of my Star of David stamped 25 round magazines have 16 coils. Therefore, I'm thinking 16 coils; however, I'm interested in feedback from anyone who has used a...
  5. R

    Wolff Spring Uzi 32 RD Cut Down for 25 RD Magazine

    I'm interested in feedback on cutting down the Wolff Uzi magazine spring for 32 round magazines for the 25 round Uzi magazine. The new Wolff Uzi magazine spring is approximately 17.5 coils. How much do you cut for the Uzi 25 round magazine spring? Note: The Wolff spring website states you can...
  6. R

    Original Vector FA Uzi Small Arms Review Article

    Good article. Always wanted one. Maybe one day.
  7. R

    New Owners for UZI Talk Web Site

    That's great news! Good luck in your next endeavor.
  8. R

    M-11 .22 conversion kit versus Max-11 .22 conversion kit

    For those of you who have both a M-11 .22 conversion kit and a Max-11 .22 conversion kit, if you could only have one kit which one would you recommend? Would it matter if shooting it suppressed?
  9. R

    MAX-11/22 .22 Conversion

    Thinking about getting a MAX-11/22 .22 Conversion kit. My current set-up is a Max-11 with the standard 3/4-10 M-11 barrel threads to accomodate my Gemtech Viper 9. I would want to use my SWR Spectra with the MAX-11/22 .22 Conversion set-up. I gather I would have to have the .22 barrel insert...
  10. R

    full autos and cops

    Most of the posts where there were issues sounded like the noise caused the problems with the neighbors. Any gun fire is most likely going to create anxiety with the neighbors for the simple reason that unless they can see where you are shooting or know you have a safe backstop they are going...
  11. R

    JAZZED

  12. R

    NEW BANNANA MAG FROM RECON ORD/ US MACHINEGUN?

    It would be nice to have some high quality factory magazines like Magpul for a M-11. Seems to me like there would be a decent market for them.
  13. R

    Are the '86' SWD M11's of less quality than earlier years?

    Sam, is there a way to tell if this is likely to be a problem, i.e., any signs to look for in a particular gun? Is the first problem a moot issue if you have a Lage SF upper? Thanks, Robert.
  14. R

    Best Ammo for M-11 with Lage Upper

    I did a quick search to try and identify the best ammo to run through my M-11 with Lage slow fire upper (750 RPM tactical bolt), and from what I saw it looked like the Winchester white box 115 FMJ was very popular. My question is do you have any opinions on the best ammo to run with reliability...
  15. R

    Anyone have a lage collapsible stock on their max-11?

    That's the stock I have on my M-11 with Lage upper. I like it. It's true you cannot use Recon magazines UNLESS you retract the stock, but that's not a problem. I've got Recon magazines, and I don't find it to be any problem. I believe they sell for $99, which I believe to be a good buy and...

Please Visit our Sister Sites Below

Sister Board - Sturmgewehr Sister Board - MachinegunBoards


Please consider becoming an UZI Talk Supporter
Top