Search results

I agree with the lack of the FS2000. I have handled an rfb and an aug clone, but the fs came home with me. My favorite rifle right now.

I have heard about it a a couple times. Don't know if they still do, but wiselite used to sell a refresh type of kit with new springs and a firing pin a couple of years ago. I picked one up since it was a resonable price just in case.

FWIW I have a WLA type 1 That has been flawless with well over 1K rounds through it and is very accurite. It's put together strait and the welds are OK, but if you look for them you can see them. I luckily got to pick this gun out from 5-6 on the shelf at the time. some had canted stocks and...

That famas is sweet. Very very rare and when they come up they pull in top dollar. I'd love to be sitting on one of them.

It was upper 4's on the price. It shot low just like my WLA gun. Just had to crank the front sight down some to get it in check

Got my wife one for an early xmas gift and it runs great. She loves the AR pistol so this was a natural for her, big flash and boom. Put a couple hundred rounds of wolf HP through it with no problems. Looks good, the wood could use some touching up though. The front sight is canted a little...

Dammit, wrong section! I'm a 'tard, could a mod please move this to the Sten/Sterling part of the board. Thanks.

I just copied this from another site, some of the stuff is in my other thread. I put this in a new thread because it's a comparison between the MPA and WLA builds. If the moderator thinks it should be in the other thread, I'm sorry and feel free to move it there. After shooting my WLA built...

I will see if I can get it off without jacking it up (don't want to mark it up since it's a gift). It does not use a racheting type lock like the WLA regular sterling that comes off easy, just threaded with no lock. It's on there tight. I will bring home tools and give it a whirl. I will say...

All the welds look great. If you are speaking of the tube itself, I cant see any evidence of welding at all, inside or out. The WLA one I have you can see the welds on the tube if you are looking for them. This one is done much better and is basically invisible. sorry about crappy pics, I...

MPA probably just started, the serial # is a bunch of zero's with a single digit on the end. All the internals look like the guts of my wla gun.

Well I took my dad shooting today and he fell in love with my WLA sterling. Yesterday when I was at a local shop I noticed that they had 5 of the type 2 cia builds, so this evening I went and picked him up one for xmas. I have heard Wise lite is pretty much done for, not sure if it's true or...

I have a couple of circle 10 drums and they have been perfect

If not looking for a traditional one, I have a primary weapon systems J-tac on my underfolder. A bit pricey, but works great at keeping the muzzle down

I love my wiselite sterling, it is probably my favorite shooter at this time. I got it at a local shop about 6 months ago. there were 3 on the shelf and compaired them and bought the nicest one. The front sight post is almost dead center, barely visable welds on the tube, and the stock is...

I have not had any problems with lawman in my mpa, only about 100rounds of it put through the gun. I usually use WWB. The lawman is not as hot as WWB, but I doubt it is your problem. Strip the gun look for anything not right snd clean and lube the bolt. take a look at the firing pin, see it...

I'd also like to know, When I buy a class 3 i'd like to get one registered in 9 and 45.

I bought 2 chinese style drums off of ak47 rifle . com and the one I use works great. Don't knnw where they are from, but it has a circled 10 on it. They were less than 200 when I bought mine

I bought some and they work great in my MPA