Search results

Well I finally had a chance to get the m11 380 small mag well gun running with my heavy bolt. I had to machine a bit off of the bottom to clear my feed lips but its running like a sewing machine now. Definitely the best money I've ever spent on an accessory. This is what the Ingram m11 should...

Are the suppressors user serviceable? If so, perhaps you can have a rear cap made with the ratchet teeth. That way you could eliminate 2 problems at once.

Update, Zip tied the rear of the top cover down, ran 5 mags flawlessly. Now to figure out what’s bent or worn and repair. Hope this helps someone in the future!!

Good morning Andrew. I ran across a post you made about a micro with a welded feed lip that was jamming. You found an ever so slight burr on the edge where the extractor hole intersects with the bottom lip/bolt face. I'll have my son look it over with an optivisor more closely. Extractors...

No trip. But you knew that. Too funny. :) I was sent a couple of photos of the failures last night. It appears that the case rims are hanging on the bottom of the extractor. I sent a couple of extractors to try.

Good morning. I have had numerous Micros in the past and have NEVER seen this issue so I need some help. I'm trying to trouble shoot this long distance with my son who has the gun. About once in every two mags, he is getting a failure to feed and the bullet winds up with the nose caught between...

Amphibian, I have an AWC full size MK9 and a ct9ks. I always considered them to be what others should be compared to. I, like you, will only buy servicable suppressors.

Amphibian, Good morning. Have you heard a Cat Mob next to an MK9 or one of it's variants?

Perfect!! Thanks for the help. Bill

Good morning! I am set up to park manganese and zinc. The color I'm trying to replicate is darker than zinc and lighter than manganese. For those with 1st hand experience, how do you tweak the solution to adjust the color? I tried post treating the zinc with dirty motor oil but it didn't do...

?. I haven't made the top 1000 yet! :)

Yup everything Nav makes has quality workmanship. I would say way above average actually. Be great to hear Nav’s and a mk9 side by side. The tone of an mk9 with the coax design is hard to beat. Problem is you can’t tell squat from videos. I hope Nav’s sound good and sales really take off...

If you know.....you know. :)

No affiliation. Awesome suppressor. I'd be all over it but I don't need two. https://www.gunbroker.com/item/1174360100

There was an ATF letter from 2008 stating the feed lip is not an issue. For whatever ATF letters are worth.

The IDF. IDF mini IDF Micro

Can you tell me the size, location and depth for the detent hole? I'm going to drill my bolt for use with the early cocking handle.

If you are still looking for an integral Sten suppressor, Navgunner just started making them I believe.

Agreed. I'll take it one step beyond and say, paint without park is half-ass work. Park is essential after blast, to protect any surfaces that the paint cant reach. The process is easily setup even in a garage at home. Slimshady is spot on, coat, let dry for handling, move to expose unfinished...

IMI will be 1250.00 minimum. Like the one I have listed on GB. :)\ Im ithaca1 on GB.