Search results

maybe the box is worth more than the mount--i have one NIB also. think I gave way less than $100 but was years ago

pretty sure Scott Andrey has blueprints (that he made himself in the course of machining replacement parts) but don't know that he would sell copies

Galil#1--on that can in the pic, i began the threads just in front of the 28 fins. As you'll know the action bar is only about 1/8" below the barrel. Having the threads forward of the fins ensured the can's circumference (where stock was chiseled out) was FORWARD of the action bar.

my next add on will be a 2nd stock with a choate folder like in this pic this is kind of turning into my "poor man's" substitute for a suppressed greasegun, which I'll never afford to acquire

the stock was chiseled very carefully to have as little clearance as possible. Several years ago I began internally coating all my cans with silicone oil. It keeps the carbon fouling from attaching to the internals and aids in cleaning greatly, it may also absorb some heat before the tube gets...

Strobro32---What are you planning on attaching a new 45 can onto? I like short and fat also but I think 45 has a big enough bore, too short, starts to contribute to not being as quiet. That being said I just recently went with a Bowers Versa 45. It is long but I cut a reising barrel back about...

get you a loader here. https://keystonearms.com/product/reising-magazine-loader-steel/

Point being B&G may have made Micro bolts (which would be a non-slotted bolt). The original poster did not indicate whether he meant full size only or not.

a micro does not need a slot since it has no blocking bar, however if the bolt has feet they need to be reduced to the point they will slide under the angled sides of a micro trunion as described and pictured in the library in the conversion section (i believe micro and mini conversion info are...

https://www.uzitalk.com/forums/index.php?threads/american-180-adapter.102486/unread if he can print an adapter for an m16/ar15 one can be printed for an mp5

maybe i can get a mag dump video posted between turkey day and x-mas with the 51

what would really be cool is for someone to manufacture a clone of the bazooka brothers hk91 adapter to attach and feed an E&L--165-225--0r--275rd 22 drum. there used to be vids on here--i think harrissr maybe--thats where I learned of them and was able to buy the adapter before they ceased...

go to sidearm sams website, buy one of the HK tactical pistol bags for $59.00 then put this: Cole-Tac Can Caddy 5 Suppressor Pouch inside that

https://www.gunbroker.com/item/1119593269 this looks to be it

why speed it up? Are you just wanting a bullet hose? Slowing it down like a Swed K would be better (in my opinion). MK760 at 720 RPM vs Swed K at 550-600RPM. Most think hands down the slower rate is more controllable.

i would also check the chamber to make sure no burrs, grit, caked in carbon is making it harder for brass to come out of chamber, you might try reisizing some fired brass, hold gun barrel down insert one in chamber, with receiver plug and recoil spring removed, drop bolt into receiver, turn gun...

i thought the admin's opinion to begin with(before any bills were fleshed out) was suppressors are not firearms but accessories and should not be regulated at all by the fed gov in any form. this is just the first step(getting rid of the tax). next step no fed paperwork (paperwork(read database)...

I THINK THAT IS an old garth choate (Choate Machine & Tool) aftermarket flash hider from many years back.

https://www.titleiiarms.com/Uzi_Mini_Pistol_Semi_Striker_Assembly.html look at these by titleii he is the man

if you can find these each one can hold 8 suomi mags the ones i acquired had to be oiled up as the leather was quite dried out from their age https://www.libertytreecollectors.com/productcart/pc/viewPrd.asp?idproduct=6045