Search results

I have one I bought last year and have been slowly working on. The barrel adapter didn't work in my mac since my trunnion was welded just slight up causing the firing pin to not hit the primer. A guy in my gun club made me a dedicated barrel for it on a new upper which is MUCH better than the...

I ended up checking alignment and from what I can see, it didn't look off. I did end up removing the extractor and it was CAKED underneath which I think was causing the issues. I removed all the carbon, oiled, and replaced the extractor. It seems to clip onto empty cases much more easily now...

I have an M10/45 that I mainly use the Lage uppers on, but I occasionally like to run the stock uppers on for fun. I tested my side charging upper with a fixed firing pin MPA bolt and it ran great until I put the can on then it started having light primer strikes every 3-5 rounds and then it did...

I'm not aware of anyone making them, but you can use this template to make your own. I just used some mild steel and did a rough cut with a jigsaw and then used an angle grinder to get the correct thickness and profile. No complicated tools are necessary. I did it to two mags and they work...

I was told mine will be ready to ship mid next week. I'm super excited. I'm likely going to take it to the indoor range up the street the second I get it in. I only have a cheapo red dot sight to throw on it at the moment, but oh well.

Are you considering doing an M10 version?

Good to know I was close. Thanks for checking!

I tried to calculate the RPM and my best guess using an audio app on my phone and some math is about 535 RPM. It was extremely easy to control and I'm likely going to shoot it in this configuration for the most part from now on.

Alright, I finally got around to testing today. Attached is a pic of the bolt and a cast lead spacer to keep the weights from moving as much. I'll post video links to the original configuration and the one with weights. Original: Weighted:

Will do. Thank you!

I just got the tungsten weights in today and they fit with very little movement. It adds a total of 3oz to the bolt weight. I'll post some updates after I try it out. I dont have a way of measuring the RPM, so ill try to record a video if it if I can.

Partly a fun side project and partly because I can only afford one MG at this time, so having a wide range of rpm's would allow for just something different. My favorite MG I've shot has been the MP-40, so allowing me to go from that slow all the way up to ~700 rpm with Lage's variable buffer...

Thank you all for the helpful replies! I'll slowly start working on something and hopefully get it working at a slower rpm.

I'm still new to MG's and open bolts, so this may be a dumb question, but I noticed the Max 10/31 bolt has a pretty large slot at the top. Would the RPM change noticeably if I were to have a drop in tungsten weight machined? It would be pretty cool to have an MP-40 rate of fire, but there may be...

Thank you all for your help! I'll reach out to the people mentioned and see if I can something worked out :)

Hey all, I have a second-hand .45 mims I'm waiting for the stamp on, but it comes with the giant 7/8x9 thread adapter for the M10. I recently bought the Lage 10/31 and would like to use that suppressor with the 1/2x28 threads. Would anyone happen to have the thread adapter measurements, so I...

Would it be possible to get a pic of the boltface? I just bought a stripped cmmg bolt to try and weld a fixed firing pin, but I don't know how wide or tall to make the firing pin.

Hello everyone, I have an M10 in NFA jail, so I'm trying to get info and accessories together while I wait. I'm very excited and hope the stamp process goes quickly. Anyways, I'm on a waitlist for the Max 10/31K upper and I'm trying to get mags. I see Lage has the DC-31 mags for sale, but I also...