Search results

Here’s my M10/15.

I don’t recall the exact durometer, it’s not squishy. I would guess it to be about 60 on a shore A scale.

I use urethane in my M10. My first job was compounding and processing urethane so I made a simple mold and now have several lifetime supply of buffers.

Got mine today too. Appreciate the help.

Is shipping calculated correctly? I want to order 2 extractors and shipping is over $28. I know everything is expensive but that seems excessive. Is that correct? Edit.. I bit the bullet and ordered the 2, gotta pay to play and you ain’t gonna play if ya can’t extract

I like it, might need one for my M10.

I’m thinking tripod, need a good one to use spade grip and drum mags.

I’m going to use the Cry Havoc QC barrel system to go to 7.62x39 and 5.56. It might be summer before I install it, want to run it with the Lage factory warranty for a while first to make sure everything is good to go.

My Lage M10/15 upper is now on its way, should see it mid next week. To say I’m excited would be an understatement.

Remove the barrel and use a wood dowel going in from the muzzle end. Catch the edge of the case with the dowel and tap it out with a hammer. Worked for me.

Pretty cool idea, would look right at home on my MacUZI if it were for a M10. Nice work.

That’s interesting for sure.

Thank you Scott

Yes, very generous and I appreciate that. Many thanks.

What are my current (and near future) options for 5.56 uppers for my fat Mac? I was/am on the wait list for the Utilimac if that comes to life. I signed up for Lage M10/15 and figure this is the most likely to happen. Is the Tekno moving forward? Now for some general questions… Do these allow...

Yes I believe you are correct. I wasn’t aware that Umarex made them when I first asked the question. I doubt that closed bolt setup would work in a SMG but wanted to know for sure before passing on buying it.

What I’m referring to is the closed bolt from one of these

Thanks delta. I was starting to think it must be a pretty stupid and obvious question. I do appreciate you chiming in though.

Got a question about whether or not a closed bolt setup from a semiauto 22 (IWI built) will run in a SMG? I had a closed bolt setup several years ago and sold it off, now I have a chance to pick up a full size 22 for cheap. I am only interested in it if it will work in full auto. My UZI is a...

Thnx Bill. Pics sent to your email