Search results

I've actually got an M60 butt that I mounted on an AR buffer tube. Main goal was to have the fold up shoulder plate, and I could not find an AR stock that did that. Honestly, I would love a stock like that on this thing, so you could lean in more when doing dumps. Why? Why the hell not. 🤪

And yes, I added a carry handle. Because...why not? lol...

Just got the new mags in the other day. I don't have a .30 cal can, and don't want to piss the neighbors off too much, so I've only done a few semi shots and one mag dump. So far, it's working fine. I do have an "enhanced" 7.62x39 firing pin that I may cut down, but so far the stock FP seems to...

(y) A picture is worth a thousand words... lol....oddly enough, the two loaded .45 mags on the other side greatly help the balance.

I will have to try this the next time I'm at a longer range. I've got the 10/15, but have a 16" 5.56, 7.5" 5.56, 16" .300 BO, and 7.5" 7.62x39 quick change setup. Plus the factory barrel (what...11.5"?).

Gotta follow this one; a functioning .22 kit would be awesome. Best I got with my Flemming was around 80%, and that was after years of tinkering, polishing, and generally trying every trick in the book. Best ammo I found, surprisingly, was Remington Golden. It's also the only bulk ammo that runs...

He's smoking crack. He also said it's not running properly. https://www.ar15.com/forums/Equipment-Exchange/MAC-10-Fleming-22-upper/118-2288695/ i traded mine for a super shorty holster, and felt like I got the better end of the deal. Never ran properly despite multiple tweaks.

Powder Springs M10/45 with Lage 10/15 and Dolos quick change 7.5" 7.62x39 16" 5.56 w/TAC-16

Sweet! Just ordered 3.

I have two ASC right now, but not impressed with the quality. "Paint" came off with isopropyl (prior owner used marker on the mags, I was trying to wipe it off and wiped off the finish). I've heard good things about CProducts, but haven't tried yet. Last AR platform 7.62x39 I had used the old...

What mags are you using? I recently set up a 7.62x39, but looking for some decent 30s that work. I also messaged Lage about purchasing a separate bolt carrier assembly, as it would be a bit quicker than having to disassemble the bolt in the field.

Definitely interested. Had a Flemming that never really ran for shit; would love a working .22 kit.

Jesus! I picked up one new from Desantis 5-10 years ago. It's a neat novelty, but if they're going for that kind of money....might be time to sell! lol..

I opted for the Dolos, simply because it was less expensive, and Lage has it documented on their site. It's not bad, but if I had the spare change, I'd probably go Cry Havoc as well.

Any modifications needed to the Cry Havoc QCB or 10/15 receiver? I know DOLOS requires a minor modification. I'm wanting to do a quick change setup as well, but have not yet decided on which system. You have good points regarding the heat and springs...

Slightly off topic, but is that a quick change barrel adapter, and if so, what kind? I've heard of folks using Dolos, but that looks different.

They still made them as of around 5 years ago....I picked one up. :-)

Jackie just sent over a photo. I was close!

I feel stupid asking this, but do you have photos of the vise blocks in use? I have a set for my MAX-10/15, but having a hard time making the contours match (I've used other action blocks before, but these just don't seem to line up). Are the blocks different for 10/15 vs 11/15 or 11A1/15?

Primer size should not matter, as long as it's brass and not aluminum. But as the previous poster stated, most people pitch the used brass (I believe it's unleaded/clean/NT primers that they use in small).