Search results

By attempting this you will be creating a runaway machine gun at some point. With a low enough power charge the weapon will still cycle, just not enough to allow the sear to catch the bolt. Please use caution. R/s, Hiller…….

Yes, True factory Uzi is as good as you can get. R/s, Hiller……

Hand written letter with Model Serial My name and signature Asking whether or not my pre-may had been reclassified as transferable. Took a pic of the letter and my ffl and attached them to an email and sent it to nfafax@atf.gov 5/11/24. Received a written response in my usps mailbox about...

Had an Uzi become transferable. R/s, Hiller……

Used herco powder. It’s an old fashioned powder I had on hand. Herco is very versatile and has always worked well for my projects. R/s,Hiller……….

I didn’t think 115gr would cycle an Uzi or any stock smg properly at subsonic speeds and that you where full of it. You were right. I did some 115gr load development for my Uzi the last few days and was able to get a 115fmj to operate my smg great at speeds around 980’ish fps. Thanx...

I’ll be darned. I would have thought it would have made a helluva loud Bang and thrown shrapnel. Did you ever find out exactly what was stuck in the barrel? R/s, Hiller………..

What are “my guns “? R/s, Hiller………

You’re saying 4.1gr win 231 behind a 115gr projo will run a stock Uzi ? R/s, Hiller………..

Ok Bad ammo. So what exactly happened? Did you have a squib Round that didn’t fire and the round was in the chamber and you racked another round from the mag and boom or what? From the looks of the brass case, it wasn’t in the chamber at all when the round went off. I mean no matter how...

Is yours semi or full auto? R/s, Hiller…………..

Richard was a great guy. The BWE videos he made are a wealth of knowledge. R/s, Hiller………..

Bingo, you guessed it. Always looking to repurpose items I have laying around the house. R/s, Hiller..................

Fit is nice/secure W/wolfman suppressor. R/s, Hiller.........................

Could this be one of the “new” transferables? https://otbfirearms.com/nfa/transferable-machine-guns/ R/s, Hiller…………

https://mckay-ent.com/uzi/ R/s, Hiller…………

I had a fa extractor lose it’s tension. I have a few extra nos extractors on hand but figured why not try rebending my old one. I gave it a really solid bend and thought it might break while bending. It didn’t break and my retension job has been working great ever since. R/s...

I did to. They replied that they’ll let me know within ninety days. R/s, Hiller…………

I checked and you’re right. All selling 45acp extractors as 9mm. Buyer beware. R/s. Hiller…………

This is the best advice you’ll ever get. 👍🏽👍🏽👍🏽 R/s, Hiller…………..