Search results

It isn't "what do they sell for", the trick is finding one at all! I watch mini uzi parts on Gunbroker all the time and have not seen a mini uzi ratcheting top cover in years. The only ones that pop up are the non ratcheting unfinished one that the one company has made.

That looks slick! I like when there is not "bottleneck" or "stairstep" of a thin section to a larger suppressor.

I understand, and I agree with compact being ideal, but if I make up a batch of these for sale, some people are going to assume that it means their suppressor will work with the standard 10" uzi barrel and whatever suppressor they are running. Just making sure we are all on the same page. I...

I saw the your first post, but just the thread pattern doe not tell me if there is an industry standard for the length of the threaded portion, or why some companies do it different ways. I will do some further research. The article is helpful, thanks. The other thing to keep in mind with an...

I can design whatever you want, bit i need to know the thread and length of that thread for the interface for the suppressor. If people can get me that I can make things happen. ;)

BTW, Amphibian, I am running the BarrelXchange bolt in my Micro Uzi (with a homemade steel top plate with a notch cut in it for the micro uzi top cover charging handle setup) and the ejection clears the port, but it definitely is not "with gusto" as with most guns. The extractor doesn't seem...

I ended up welding up the chamfer on the front of the mini uzi bolt feet toa squared profile, cleaned up with a mill and a file, and dropped in the gun to test. Would run fine on full auto, but bolt would not drop on semi (which I kind of expected) I cut a small chamfer at the bottom edge to...

Dang, I never thought of that....wood stock, wood grips, wood forend? That would look classy!

If no one else is making one I would be happy to make a batch, as I want a couple too! I also am running a few prototype barrel nuts that would allow you to build your own direct thread suppressor with 1.375" I.D. tubing, freeze plugs, and washers like I did with my post sample Sten. Really...

How is the Remil receiver, good quality work? How long did they take to ship it after you ordered?

I have never seen or heard of a canted reticle, but that is not to say it is impossible. The fixing screw is the screw that mounts the tube in the housing, do not remove it, iirc that would release the nitrogen in the tube. (I will check my resources to confirm) Also, removing it isn’t going...

I am running PMC 124 grain 9mm, which has had no issues in my Micro uzi and full size uzi. I will try some other ammo to see if it is a fluke that the mini does not like it!

Amphibian - I will check the top cover with a feeler gauge, thanks for reminding me of the measurement! Yes, the McKay bolts are new old stock factory Israeli full auto Mini uzi bolts. delta-10 - Good thought on something underneath like the feedramp preventing the sear from moving all the way...

The sear holes are plenty big and have no interference with the sear feet. Re-angling isn't an option as I can't lower highest point of the angle at the front of the feet, which is the issue I am trying to solve. I need to add material in a way that lowers that point (As I said, I can...

I have a post sample Mini Uzi I built, used one of the new old stock bolts from McKay, and although it initially worked in testing, the bolt is now running away. About half the vertical surface of the feet on the bolt have the angled cut on them, so what appears to be happening is in dry...

Dang, wish I had gotten the pin and extractor when I ordered a bolt from you last week!

I have a Bowers Vers9 and my personal opinion is it is way overheavy for what it should be. That being said it was hearing safe and a pretty good sounding can. I also had some issues with a baffle strike when using the uzi barrel nut adapter, but Mr. Bowers said that is the first time he had...

I have a McKay receiver I want to Duracoat the match the gray parkerizing on my uzi parts- can snyone recommemd which of the colors is the best match? Parts are all surplus, I am guessing Dark Parker or Green Gray Parker are probably the closest. Otherwise I can just break down the build and...

They dont go for $850, they go for $475-$550 tops. To be homest I dont see anythjng sbout that kit that makes it “superb” it is just a run if the mill demillef uzi parts kit. OP is posting his own auction in the tech forum…kinda poor form IMHO…

Thst is a $2000+ kit all day long, mini full auto bolts with feet are selling for $1000 to $1300