CNC Warrior Galil Gas Blocks possibility

[AresShrike]

Great idea about that pre-order for the Galil Sniper gas block.
If they get enough "firm" orders, they could go ahead, great idea!
I'll have to suggest it to them, or, anybody else could go ahead and express interest to them also. It sure couldn't hurt. Mention too, that they already have the "CNC model" of the Sniper block done if you do call.

 

[AresShrike]

Well, here's the latest about the CNC-Warrior gas blocks, and receivers.
As of, around Wednesday, the Galil receivers are about 3 months out, although they're making them now(?), and the gas blocks are several months after that, maybe.
They're working to full capacity.

 

[adipose]

Well, here's the latest about the CNC-Warrior gas blocks, and receivers.
As of, around Wednesday, the Galil receivers are about 3 months out, although they're making them now(?), and the gas blocks are several months after that, maybe.
They're working to full capacity.

I handled the last 3 group buys and also talked Denny into making .308 / micro receivers on top of the .223 ones.

It always goes longer than the projection. They are always busy. Clearly saw that last year when I went to their shop and met them in person.

 

[AresShrike]

If CNC-Warrior ever did make those Galil folding stock pivot pins, they never got on the site.

 

[lcastillo]

Is the gas block production dead in the water?

 

[AresShrike]

The last I spoke to them, was back in March.
Receivers were supposedly 3 months out, and the gas blocks were, several months after that...........

 

[WCC]

Do you need gas blocks?

 

[AresShrike]

WCC - No, I don't personally need any more gas blocks. I've got three ARM blocks, in self made kits, that I may, or may not, build into three ARM's.
The whole thing with the CNC-W gas blocks was to have some new ones available, in production, as the used parts supply is very unsteady, and all to often, good gas blocks are very hard to come by.
Thanks though.

 

[Back in the ussr]

Is there a pre order galil receiver for Cnc warrior?

 

[AresShrike]

Back in the ussr - I don't see any pre-order option on their site, and they did say to me that there'd be no pre-orders on them.

 

[Pamwe Chete]

So did R4 blocks make it to the possible list?

 

[AresShrike]

The only Galil gas blocks they received, and made Computer-aided design (CAD) "models" of, were the ARM, and Sniper gas blocks.
They are still probably, months out, if were're lucky.
They'd probably need to see how well the ARM gas blocks sell, before doing any others.

 

[adipose]

The only Galil gas blocks they received, and made Computer-aided design (CAD) "models" of, were the ARM, and Sniper gas blocks.
They are still probably, months out, if were're lucky.
They'd probably need to see how well the ARM gas blocks sell, before doing any others.

Are these going to be missing the sling loops on them?

 

[AresShrike]

Adipose - Denny did express some "apprehension" about welding on the sling loops, so I can't say for sure, but, I'd say they probably will not have them installed, which, to me, isn't a "deal breaker", but, is a bit of a pain anyway.

 

[AresShrike]

Still waiting.
Maybe I should remind them.