D&D parts questions

CQB762

Member
Feedback: 0 / 0 / 0
Joined
Oct 14, 2024
Messages
12
Location
ID
OK guys, I bought S/A bolt and firing pin assembly about 15 +/- years ago for a semi build that I never got to. Now I’m planning on getting a SMG that many of you have helped me figure out what to get.
? if my memory serves me right, hopefully your is better, they told me that it was US made to count towards the needed parts count.

1st who made the majority of their bolts and if it is US and not IMI what is A fair price to ask for it. I never used it but it has a few marks from storage
 

Attachments

  • IMG_0192-compressed.jpeg
    IMG_0192-compressed.jpeg
    921.9 KB · Views: 27
  • IMG_0194-compressed.jpeg
    IMG_0194-compressed.jpeg
    807.3 KB · Views: 27

barrelxchange

UZI Talk Life Member
Feedback: 33 / 0 / 0
Joined
Mar 24, 2003
Messages
1,055
Location
communist state of IL
If memory serves. D&D used to convert IMI FA bolts to semi bolts. A remanufactured bolt would qualify as a US part.
Drilled out for the firing pin and milled off the bolt face lip and cut the bottom for the striker assy.
If you look at the rear of the bolt that will probably tell all.
My bet is it looks like the rear of a FA bolt.

fwiw: Price it like a used semi bolt
 

CQB762

Member
Feedback: 0 / 0 / 0
Joined
Oct 14, 2024
Messages
12
Location
ID
Thanks
Now that I look at the bolt vase with a pair of readers it looks like the face lip was removed. What is a fair price now a days? If it’s inappropriate to ask that on this forum sorry….
 

AKarms

Well-known member
Feedback: 1 / 0 / 0
Joined
Feb 12, 2024
Messages
123
Location
New Hampshire
Thanks
Now that I look at the bolt vase with a pair of readers it looks like the face lip was removed. What is a fair price now a days? If it’s inappropriate to ask that on this forum sorry….
I’ve seen them 4-600 on gb
 

IV1967

Well-known member
Feedback: 2 / 0 / 0
Joined
Sep 12, 2018
Messages
51
I’d be more inclined to believe that was an IMI semi bolt, as the ejection port opening is short compared to a full auto bolt that has been modified for semi use. If it is a converted bolt it should have two pins protruding from the rear, these were added to converted full auto bolts to act as a stop for the striker assembly, as full auto bolts have an indentation in the rear to avoid striking the folding stock nut or fixed stock protrusion that inserts into the rear of the receiver.
 

Please Visit our Sister Sites Below

Sister Board - Sturmgewehr Sister Board - MachinegunBoards


Please consider becoming an UZI Talk Supporter
Top