Flat nose bullets in my FA mini

[TheColtCollector]

My FA mini uzi just came in from out of state to my local dealer. It runs reliably on ball ammo when I test fired it but unfortunately for me I have tens of thousands of rounds of flat nose bullets which it chokes hard on. If I have my dealer send it over out to someone like BWE is there anything that can be done to help it run with flat nose bullets? Or should i cast round nose bullets?

It’s an unslotted group industries mini registered reciever with all full auto parts.

Thanks!
Beau

 

[mmi]

you could try putting the bolt into an old fashion uzi pistol .

 

[TheColtCollector]

you could try putting the bolt into an old fashion uzi pistol .

Not sure what that would do for me

 

[Garrett]

My full-size Group gun wouldn’t feed anything but RN, with the standard SMG feed ramp. I had BWE install a semi-feed ramp, and it feeds FP and HP just fine now.

Does the Mini have the same type of feed ramp as the full-sized SMG?

 

[TheColtCollector]

My full-size Group gun wouldn’t feed anything but RN, with the standard SMG feed ramp. I had BWE install a semi-feed ramp, and it feeds FP and HP just fine now.

Does the Mini have the same type of feed ramp as the full-sized SMG?

Not sure, this is my first uzi and I’m not too familiar with them

 

[mmi]

maybe the micro would feed them

 

[Goat]

It probably has the SMG feed ramp.

A semi auto ramp will probably solve the problem