Heads-up on SMG extractors

mike400

Well-known member
Feedback: 0 / 0 / 0
Joined
Apr 1, 2008
Messages
93
Location
Idaho
With the prevalence of CNC machining, I hope that someone might consider making a bunch of these? I would be in for few of these. I imagine that many here would buy a number of spares as well.
 

Galil#1

Well-known member
Feedback: 1 / 0 / 0
Joined
Jun 21, 2018
Messages
809
With the prevalence of CNC machining, I hope that someone might consider making a bunch of these? I would be in for few of these. I imagine that many here would buy a number of spares as well.
Yes indeed, I would buy several+ too.

Also... like for the old H&K family of MP5, HK53, etc. like a dam "super pin" for the crap extractor pin design ha ha!
 

Mack90

UZI Talk Life Member
Feedback: 0 / 0 / 0
Joined
Dec 2, 2020
Messages
26
Location
Georgia
I bought three extractors that came with the pin from Sarco in 2021. My extractors do not have the seam line in it. What is the total length supposed to be on a real extractor. I am trying to make sure these are not junk extractors.
 

K2

Well-known member
Feedback: 1 / 0 / 0
Joined
Dec 3, 2006
Messages
433
Location
PMR&PC
Hi Mack90,

I've got 2.125" OAL. 1.630" from the inside of the hook to the inside of the retaining pin slot.

Enjoy,

K2
 

Galil#1

Well-known member
Feedback: 1 / 0 / 0
Joined
Jun 21, 2018
Messages
809
Say NO to SuckCo items seems to be the trend... can also find junk on Gunchoker many times over etc IMHO.
 

ScottinTexas

UZI Talk Life Member
Feedback: 14 / 0 / 0
Joined
Mar 22, 2015
Messages
2,940
Location
Near Houston, TX
Sarco refunded my purchase of several of these extractors months ago with no questions asked. If they came from Sarco within the last 18 month odds are they are garbage.

If they won't refund your money, toss them in the trash and do the Uzi community a service; nobody needs these defective frauds floating around for years. I kept just one, labeled it as 'Bogus SARCO extractor 2023-24' just for reference.
 

Jack007

UZI Talk Life Member
Feedback: 24 / 0 / 0
Joined
Nov 5, 2006
Messages
1,112
Location
Midwest
Well, this thread is going to be two years old soon. Has anything changed on the availability of extractors? I still find it hard to believe that with the large number of Uzis out there, a vital part like this would become unobtainium?
 

Mack90

UZI Talk Life Member
Feedback: 0 / 0 / 0
Joined
Dec 2, 2020
Messages
26
Location
Georgia
Thank you for the measurements. The three I have are 2.16” oal and 1.656” from inside of hook to retaining pin slot. These were purchased a good while back. I am tossing them unless someone has a use. The flathead slot is also 90 degrees off :-/
 

Slowmo

Well-known member
Feedback: 1 / 0 / 0
Joined
Nov 7, 2022
Messages
594
Location
Georgia
Well, this thread is going to be two years old soon. Has anything changed on the availability of extractors? I still find it hard to believe that with the large number of Uzis out there, a vital part like this would become unobtainium?
IWI sells them again.
 

Jack007

UZI Talk Life Member
Feedback: 24 / 0 / 0
Joined
Nov 5, 2006
Messages
1,112
Location
Midwest
"Note: This item is only compatible with the uzi pro"

Does anyone know if the Uzi Pro extractor use the same old Uzi extractor?
 

slimshady

Well-known member
Feedback: 0 / 0 / 0
Joined
Sep 19, 2004
Messages
1,088
According to the Good (UZI) Book it is a slightly modified Micro/pistol bolt. Modified to be a side cocker, the extractor is the same. No one has complained it didn't fit and that source has been recommended here for years. Most of the other parts work too, although the FP is retained differently. So technically the group of parts as a whole only fit the Pro.
 

scotty57

Well-known member
Feedback: 1 / 0 / 0
Joined
Jan 29, 2019
Messages
126
I just ran out of my IMI extractors............. Trying to gem more brought in.
 

Please Visit our Sister Sites Below

Sister Board - Sturmgewehr Sister Board - MachinegunBoards


Please consider becoming an UZI Talk Supporter
Top