jack stanford
Well-known member
- Joined
- Jun 27, 2012
- Messages
- 116
Idaho Automatic Weapons Collectors Association puts on an annual match called Kelly's Heroes. This year I was the match director.
The first stage was called "Straight Away." The stage had targets that were covered up by ones in front of it on three rows. There was an optional spinner target that you would get 20 seconds off of your time if you were able to spin it.
The second stage was called "Pit Stop." It consisted of a formula 1 cutout that had 10 clays on it positioned where lug nuts would be. You had to shoot out the first set of clays, then have a mandatory magazine change, then shoot out the second set clays. After the clays were shot there was a final popper at the end of the gun pit.
The third and final stage was called "The Shikane." There was a stack of tires that was used as a barrier that had to be shot behind alternating sides of the pit, shooting poppers.
Here is the video
I was shooting a M11/9 with a Lage Max-11 upper, Aimpoint Comp M4s, Lancer Systems handguard attached with a custom adapter that I made, and Bowers can. I had to use a custom barrel to make it all fit.
The first stage was called "Straight Away." The stage had targets that were covered up by ones in front of it on three rows. There was an optional spinner target that you would get 20 seconds off of your time if you were able to spin it.
The second stage was called "Pit Stop." It consisted of a formula 1 cutout that had 10 clays on it positioned where lug nuts would be. You had to shoot out the first set of clays, then have a mandatory magazine change, then shoot out the second set clays. After the clays were shot there was a final popper at the end of the gun pit.
The third and final stage was called "The Shikane." There was a stack of tires that was used as a barrier that had to be shot behind alternating sides of the pit, shooting poppers.
Here is the video
I was shooting a M11/9 with a Lage Max-11 upper, Aimpoint Comp M4s, Lancer Systems handguard attached with a custom adapter that I made, and Bowers can. I had to use a custom barrel to make it all fit.
