Max-11/15 Video

[hkg3k]

Ummm.. dude.. Check out the Stoner 63 LMG.

https://imgur.com/gallery/t4YxIGg

That's way cool and that's a Stoner...just not the Stoner 63 LMG. That's the Stoner/Knights 96 LMG

 

[cajun 22]

CAN NOT WAIT, for the M10 version of this!! I’m gonna take that bitch helicopter hog hunting!!

Don't give me any ideas. Been on one of those already.

GG thanks for the review. Have you run it suppressed yet? Video please.

 

[M10]

That video is awesome but the barrel is still looks too long .

Any shorter, and you get in to cycling failures with many types of ammo. I only own two AR variants with sub-11.5" barrels, and one of them required extensive work to be 100% reliable.

With 7.62x39, you might be able to shave another few inches, but you will lose velocity as the powder has not completely ignited by the time the bullet exits the barrel. Makes for some SICK fireballs, however.

 

[gotgraham]

Don't give me any ideas. Been on one of those already.

GG thanks for the review. Have you run it suppressed yet? Video please.

I haven't had the chance yet, however I may this weekend (shoot suppressed). I'll definitely get more video regardless.

 

[zipakna]

CAN NOT WAIT, for the M10 version of this!! I’m gonna take that bitch helicopter hog hunting!!

+1.... with .50 Beowulf barrel... caaaannnnnnt Waite!

i wanna see a max11/15 with 7 inch barrel...

 

[JJ1234567]

+1.... with .50 Beowulf barrel... caaaannnnnnt Waite!

i wanna see a max11/15 with 7 inch barrel...

Check his facebook page, theres a slow mo video with an 8" barrel one

 

[Fishman]

+1.... with .50 Beowulf barrel... caaaannnnnnt Waite!

i wanna see a max11/15 with 7 inch barrel...

If I get one for my m10, you better believe that my integrally silenced 450 bushmaster barrel is going on there at least once

 

[gotgraham]

Went out shooting again today. The last two clips are running a heavy buffer and OE spring.

https://www.youtube.com/watch?v=I38MR9frc7c

 

[m11stuff@hotmail.com]

Awesome video! What ammo are you using with the heavy buffer and OE spring? It has a nice rate of fire.

 

[gotgraham]

Awesome video! What ammo are you using with the heavy buffer and OE spring? It has a nice rate of fire.

Thanks! I ran it with both wolf and m193. I turned the gas down a fair bit as well. It was super pleasant to shoot with the reduced ROF. The buffer is from heavybuffers.com - the 8.3oz XH Carbine Buffer. By OE spring I meant to say stock AR-15 spring. With the combo it was very soft shooting and cycled well (no issues catching the sear). I probably could have turned down the gas even more.

 

[FAL]

Likely an obvious question, but I'll ask anyway to confirm, to run different buffer weights and spring combos, you need to drill the hole?

 

[gotgraham]

Likely an obvious question, but I'll ask anyway to confirm, to run different buffer weights and spring combos, you need to drill the hole?

That is correct

 

[zipakna]

Check his facebook page, theres a slow mo video with an 8" barrel one

ive seen all the videos. everywhere. im so impatiently waiting for my number to be called i keep watching them all again and again. ive ordered parts from Alexander arms.. what i NEED to do it call richard to ask for a new pin for my safety. the pin is bent and wants to back out. i think i bent it last time p tried to push it back in.

 

[strobro32]

https://www.youtube.com/watch?v=I38MR9frc7c

Wow, I clocked 550 and 515 RPM for the last two standing strings.

 

[daniel.beaudean@gmail.com]

Was the wolf ammo shot brass or steel ?

 

[gotgraham]

Was the wolf ammo shot brass or steel ?

It was steel.

The recipe is to use a stock AR spring, super heavy buffer (like the XH one from HeavyBuffers.com), and dial down the gas. It runs this slow on everything.

 

[daniel.beaudean@gmail.com]

Great!! I am going to buy some steel Wolf now that prices are so low. thanks

 

[gotgraham]

Great!! I am going to buy some steel Wolf now that prices are so low. thanks

It's the polyformance ammo. I just bought a couple cases from sgammo for about 21c/rnd shipped.

 

[EL DUCE]

It's the polyformance ammo. I just bought a couple cases from sgammo for about 21c/rnd shipped.

Nice. I may have to invest!

 

[BRADLEYBUILT]

It was steel.

The recipe is to use a stock AR spring, super heavy buffer (like the XH one from HeavyBuffers.com), and dial down the gas. It runs this slow on everything.

Richard,

Will shooting steel in this upper void warranty?