Micro Uzi Carbine Build

[Brian Ski]

The most important Point for the whole reciever is the "ejector rivet hole".
As long as "C& D& E" holds true I can get the lower to line up.

The ejector fits in the slot... So you can drop it it and just mark the hole... But you are right, there is not a lot of room to be off with the ejector in the slot on the bolt.

 

[suka5168]

Not sure by your view... This area I have so crappily highlighted... Is not a hole... It has a piece of steel welded in... Follow???

Brain,
This is the slot the feed ramp slides into. The slit in the feed ramp slide right into place.

 

[Brian Ski]

Brain,
This is the slot the feed ramp slides into. The slit in the feed ramp slide right into place.

There you go... Was in a hurry and was just looking at it from the bottom...

 

[suka5168]

Here's a pic of what I welded together this weekend.
The Uzi Pistol. Its sister (semi Micro Carbine) is on standby.

The rear "ear" are the dimensions of a FS with its top and aft trimed to the "style" of a pistol.
This was done to use the exsisting FS top cover catch and A sights; instead of buying new Pistol rear sights and cover catch.

 

[suka5168]

Its sister the Micro. All parts ready to be assembled.

 

[BlackBird]

Its sister the Micro. All parts ready to be assembled.

DO you want to sell the folding stock?

 

[AK43]

DO you want to sell the folding stock?

REPLY: I cannot speak for him but I doubt that he wants to sell the folding stock because this is a build he has been working on and coming along real nice Suka!

 

[Brian Ski]

DO you want to sell the folding stock?

Vector shows the folding stock available... Click on parts in the left column and go almost to the bottom under Micro...

Just remember the barrel has to be long enough to comply with the 26" over all length (with the stock extended) when you put the stock on... Or else you have an illegal SBR. On a semi auto of course.

 

[suka5168]

re3

Managed to finish off the Homemade Stock mount today. 6/18. You can tell from the previous pic with the square edges. It is now rounded with the center slot cut for the stock lock open.

The folding stock is from my KWC airsoft Mini Uzi. The specs a a few microns off from a standard IMI stock and had to grind off some from the pivot point. Thus, the Homemade mount. The Stock itself is made of a Cast alloy (rather soft) whereas the IMI are made of harden Steel.

 

[suka5168]

ett

This was a Standard Hebrew Lower, It is now a Pistol "looking" lower.

Although this "trigger group" is it modified and reworked in the USA , it will not be a 922(r) compliance part.

The ends where made from 1.6mm sheetmetal bent according to a set of plans I drew up. At the end off this build I should be able to post my drawing for the reciever and all part I had manufactured. (I lost some prints).

 

[suka5168]

rtt2

Even with the authentic folds to the forward ear guards.
Both done with some persuation with a hammer and vise.

 

[suka5168]

Just remember the barrel has to be long enough to comply with the 26" over all length (with the stock extended) when you put the stock on... Or else you have an illegal SBR. On a semi auto of course.

With a 16" standard F/S barrel ( flange relocated ) This Micro Carbine is 27"

Reciever is about 9" and Stock 8"... (roughly).

 

[suka5168]

REPLY: .... coming along real nice Suka!

Thanks AK43 looking forward to getting this done.

Sorry Blackbird.... I need some funds but cant afford to sell it either. BTW. Its an alloy airsoft stock Made in Taiwan. about $16 from the spare parts booklet included with the KWC Mini Uzi.

 

[Brian Ski]

Sorry Blackbird.... I need some funds but cant afford to sell it either. BTW. Its an alloy airsoft stock Made in Taiwan. about $16 from the spare parts booklet included with the KWC Mini Uzi.

Heck of a lot cheaper than Vector!!!!!!

 

[CH33]

This is alot of the information I have been after for a while. I have wanted micro and mini Uzi blueprints but never had anyluck finding them. your files are helpful, but could you please put the files into pdf format or give me the links to the files. I really need complete micro and if possible Mini UZI blueprints because I am a design engineer and I plan on doing the blueprints in AutoCAD3d & 2d aswell as master CAM. With these Master CAm files people can machine the parts with all the drawings programmed and With the CAD drawings it would be very useful for me with training aswell as being useful to the many people I have heard from Who want Blueprints and If Cad and CAM files are made even better.
Can you please email me all the info you have on the micro UZI and if possible give me a copy of the blueprints or measurements of the parts so I can make CAD drawings of it.
Im getting the 22 conversion maual I just have to remember where it was and I have the full auto conversion manual which includes a dozen pages of blueprints. so hopefully with this info and the prints I have I will be on my way to completing the file.
If you know of any links where I can get these or other blueprints email me please through this forum and then we can contact each other later.
I am a Metal Fabrication Engineer by trade and now I am doing a diploma in Engineering to learn design and other aspects I didnt understand in manufacturing.
I create jigs and Templates and they are always accurate as long as the tradesman and machines are accurate enough. I want to create a full file AutoCAD CAM and jigs and Templates if anyone would be interested in helping me I would appreciate it.
I hope to see a reply in the gunsmithing forum in my thread about micro UZI blueprints or in this forum and thread.
If anyone can help in any way I would appreciate it and return the favour.
I will post the manuals I get or any other useful info.
Please share your data with me. I will do it in return.
Thanks,from CH33

 

[Cozmo]

This is alot of the information I have been after for a while. I have wanted micro and mini Uzi blueprints but never had anyluck finding them. your files are helpful, but could you please put the files into pdf format or give me the links to the files. I really need complete micro and if possible Mini UZI blueprints because I am a design engineer and I plan on doing the blueprints in AutoCAD3d & 2d aswell as master CAM. With these Master CAm files people can machine the parts with all the drawings programmed and With the CAD drawings it would be very useful for me with training aswell as being useful to the many people I have heard from Who want Blueprints and If Cad and CAM files are made even better.
Can you please email me all the info you have on the micro UZI and if possible give me a copy of the blueprints or measurements of the parts so I can make CAD drawings of it.
Im getting the 22 conversion maual I just have to remember where it was and I have the full auto conversion manual which includes a dozen pages of blueprints. so hopefully with this info and the prints I have I will be on my way to completing the file.
If you know of any links where I can get these or other blueprints email me please through this forum and then we can contact each other later.
I am a Metal Fabrication Engineer by trade and now I am doing a diploma in Engineering to learn design and other aspects I didnt understand in manufacturing.
I create jigs and Templates and they are always accurate as long as the tradesman and machines are accurate enough. I want to create a full file AutoCAD CAM and jigs and Templates if anyone would be interested in helping me I would appreciate it.
I hope to see a reply in the gunsmithing forum in my thread about micro UZI blueprints or in this forum and thread.
If anyone can help in any way I would appreciate it and return the favour.
I will post the manuals I get or any other useful info.
Please share your data with me. I will do it in return.
Thanks,from CH33

I realize this is a very old thread, however I'm curious if all this information was ever compiled as the last poster suggested?