Need Scope Recommendation

BPsmoke

Well-known member
Feedback: 0 / 0 / 0
Joined
Jun 27, 2012
Messages
343
Intended use: 6.5mm Creed bolt gun, out to 1,000 yards. (but more typically 500-600 yards)

Requirements: 30mm tube, 50mm objective (max) good tactile clicks, ranging reticle, side focus, target knobs

Budget: $1,500 hard max

Thanx!
 

MrM4

FFL 07/02, UZI Talk Life Member,
Feedback: 81 / 0 / 0
Joined
Jan 24, 2008
Messages
6,895
Location
Western South Dakota
Leupold ER/T 6.5x20 TMR M5 FFP
Leupold ER/T 4.5x14 TMR M5 FFP

Either will do everything you listed for the price you listed.

If you have a hard time finding one at a "great" price send me IM.
 
Last edited:

ptrthgr8

UZI Talk Life Member, , FFL/C&R
Feedback: 0 / 0 / 0
Joined
Sep 29, 2004
Messages
1,408
Location
North Freakin' Dakota
This past summer I picked up a Leupold VX-3 Long Range Target Rifle Scope from MidwayUSA for use on my custom Mosin target rifle. It's got a 30mm tube, 6.5-20x, 50mm objective, and side focus. I went with the Leupold varmint hunters reticle, but there are other reticles offered, too.

http://www.midwayusa.com/product/38...50mm-side-focus-varmint-hunters-reticle-matte

CustomRight2-vi.jpg


I went with a set of Leupold's medium 30mm QRW rings. May have been able to go with the low rings… but they work.

The VX-3 is a pretty solid scope and it comes in several different configurations. I've not had a chance to shoot this rifle beyond 300 yards yet, but so far I've been nothing but extremely pleased with everything about this scope. I had looked at Nightforce and a few others, but this Leupold seemed to offer the most bang for the buck and didn't break the bank along the way.

Cheers,

~ Greg ~
 

MrM4

FFL 07/02, UZI Talk Life Member,
Feedback: 81 / 0 / 0
Joined
Jan 24, 2008
Messages
6,895
Location
Western South Dakota
I really like the TMR rectical, Easy Ranging and Easy adjustment with M5 Turrents. The fine lines allow you to get a much cleaner read on things and the small spaceing at the edge of each plane is broken down into .20 mills to get you that much closer.

This is a great pic showing the capabiltys of the TMR.
http://www.google.com/imgres?imgurl...4HUeL_I5GJ2AWk_YDQBw&ved=0CDUQ9QEwAA&dur=3628


With Leupold you have to pay attention what turrents you get with what rectical you order, they mix and match.
M1 are .25 MOA per click
M2 are .5 MOA per click
M3 are 1 MOA per click Elevation, .5 MOA per click Windage
M5 are .1 MILL per click
 
Last edited:
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.

Please Visit our Sister Sites Below

Sister Board - Sturmgewehr Sister Board - MachinegunBoards


Please consider becoming an UZI Talk Supporter
Top