I will echo what TSPS wrote and just add that IIRC, the tail end of the pin has a hollow and is just barely flared. Driving it out with a punch is easy if done on a hard supported surface. When installing it in the new adapter...I would hit the tail end with a dremel or grinder to take the flare off the tail end.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Norse Forge ACR stock adapter for the M10 9/45
- Thread starter ZeroCool
- Start date
Thx!I will echo what TSPS wrote and just add that IIRC, the tail end of the pin has a hollow and is just barely flared. Driving it out with a punch is easy if done on a hard supported surface. When installing it in the new adapter...I would hit the tail end with a dremel or grinder to take the flare off the tail end.
A hammer and punch will get it out. They're in there tight.
Thx!
I want the adapter but I can't find the CZ scorpion stock for sale anywhere.
https://shop.cz-usa.com/ProductDetail/366313600703_Evo-Stock-Complete
Says in stock here
That’s Airsoft though
Edit: I guess this one is real, but I wouldn’t trust an airsoft site
Interesting. "Pinned for compliance".
That’s Airsoft though
Edit: I guess this one is real, but I wouldn’t trust an airsoft site
Evike is a reputable site
Awesome. Thank you ill check it out.. I can't decide on the Zhukov or the Scorpion stock. Both are nice.
Sorry I didn't see it was possibly airsoft or pinned but just buy from cz and you can't go wrong. And I would just get both myself
I would love to get both but that's almost $550 in stocks and adapters. I guess I could just buy the adapters since that is the harder part to find.
Fudge... I still need a Norse Forge ACR stock adapter for M10 9/45. Have the ACR stock but now SOL. M10/9 still in ATF jail, but like to have everything ready etc. Any help will be greatly appreciated and can provide a finder's fee.
Fudge... I still need a Norse Forge ACR stock adapter for M10 9/45. Have the ACR stock but now SOL. M10/9 still in ATF jail, but like to have everything ready etc. Any help will be greatly appreciated and can provide a finder's fee.
I love the ACR stock. If Norse made one for my m11 I'd jump on it. I have one on my CZ Scorpion SBR.
I do know that an acr adapter for the m11 is in the works. I have the 3d printed version I checked out on my m11. Final tweeks are being made and a final version will be produced. Not sure on the timeframe on that though. Also I believe more m10 acr adapters could be coming I'll have to ask Jordan about it.
I would love to get both but that's almost $550 in stocks and adapters. I guess I could just buy the adapters since that is the harder part to find.
These adapters are pretty limited low production so get it while it's available kind of thing or you might never get it again.
- Status
- This thread has been closed due to inactivity. You can create a new thread to discuss this topic.
Please Visit our Sister Sites Below
Please consider becoming an UZI Talk Supporter