Shrike Owners, need favor

[M60joe]

I haven't received mine yet and I was wondering if a RLL would work. Anyone have pics of the uppers rear lug and the rear of the bolt carrier?

Please e-mail m60joe@m60joe.com or post here.

thanks

 

[A&S Conversions]

Sorry that I don't have any pictures, but I've inspected my brother's upper. It looks to me that the carrier simply needs to be machined back to SP1 specs. I'm not sure of the ROF since that will lighten up the carrier.

Scott

 

[BeltFedEd]

Here ya go Joe.

JTinIN posted a ton of pictures in his thread.

Shrike 101 - What Have I Missed?

Threre is a link in post #2 to all of his pictures.

Here's the one you're looking for. Looks like standard rear end M-16 carrier.

A BIG Thank You to JTinIN for the photo's!

 

[jsitz]

I have one that has been run with a LL before.

 

[M60joe]

Thanks for the pics.

 

[JTinIN]

Anyone make a SAW box opener yet?

Getting old enough etc. and looks like they are too much of pain to open, at least with out Tannerite or ???? :chainsaw

 

[SSBiggun]

Hey Joe,
Are you still making the linker. I just linked up another 500 rds by hand and it sucks hella bad.

 

[M60joe]

Hey Joe,
Are you still making the linker. I just linked up another 500 rds by hand and it sucks hella bad.

Yes. Batch of 10 will be done in 3-4 weeks. Of those 4 sold.

m60joe@m60joe.com

 

[JTinIN]

Yes. Batch of 10 will be done in 3-4 weeks. Of those 4 sold.

m60joe@m60joe.com

Any easy way to unlink, short of buying a mm23e, the factory ammo linked with the HK23 (i.e. with holes) links? These don't push out that easy for these old fingers.

 

[M60joe]

Any easy way to unlink, short of buying a mm23e, the factory ammo linked with the HK23 (i.e. with holes) links? These don't push out that easy for these old fingers.

I've made adapter plates that you place between the linking pusher plate and the rear of the cartridges. This pushes the cartridges out of the links.

 

[JTinIN]

I've made adapter plates that you place between the linking pusher plate and the rear of the cartridges. This pushes the cartridges out of the links.

Thanks.

Any toughs of making a handle for the barrels which connects to the gas block hole (liked the FAL modified handles but not sure).