SubGun24’s 22LR conversion kit (review).

[KickStand]

GET ONE!
Video review below:

———————————————————

Looks like he’s done it again!
His S&W 76 22 kit is perfect and I’m sure this will be too.

To buy:

UZI .22LR Slo-Fire Conversion Kit for Full Auto UZI

NOW SHIPPING Conversion kit for the full size select fire registered receiver UZI Rate of Fire Adjustable 500 - 700 Rounds Per Minute Kit Contains One 40 Round Magazines in Black Aluminum Slow Fire Bolt with hardened steel sear face, steel extractor and firing pin Two Reduced Recoil Springs and...

subgun.store

See link below:

UZI .22LR Slo-Fire Conversion Kit

My .22 conversion kit is complete. All parts are now in stock. Conversion kit for the full size select fire registered receiver UZI Rate of Fire Adjustable 600 - 700 Rounds Per Minute Kit Contains One 40 Round Magazines in Black Aluminum Slow Fire Bolt with hardened steel sear face, steel extract...

www.sturmgewehr.com

 

[dustindu4]

And to think I thought Vector's $300 conversion kits were too expensive. This is half of what I paid for my gun.

 

[AKarms]

Wow that is pricey. I know the older kits are pricey because of rarity, I figured a new production kit would be somewhat cheaper. But, that being said, if they drop in and run without any tuning it’s probably worth it. Interested to see feedback…

 

[Chef]

The last manufacturer of .22 conversion kits was Subgun Ordnance in 2020, if I'm not mistaken.
And they were $675.
That being said, if I didn't already have a handful of other kits, I wouldn't hesitate shelling out the $1300 for his kit as they already have the "slow-fire" conversion built in, which is really nice to slow the ROF from M11 speed down to something more reasonable.
Some people might disagree, but to me, a .22 kit and mags that run is worth it's weight in gold for the cost savings on ammo.
I'd rather shoot 1000 rounds of .22 than a a couple hundred rounds of 9mm.

 

[KickStand]

I hate to say this but the dollar has lost a TON of buying power since 2020 and we all know it.

I believe SubGun24’s Uzi kit will be shipping with two springs (normal and slow). His slow fire spring is shooting UNDER 500 RPM. The normal spring is around 650-700 RPM.

 

[Jmacken37]

And to think I thought Vector's $300 conversion kits were too expensive. This is half of what I paid for my gun.

These are the good old days! Buy what you can afford now, and you'll be saying the same thing about this kit in a few years.

 

[unclebear]

Outstanding! Subgun24's 76 kit was home run for me . Everybody that tries it loves it .
Bought the Uzi kit and 3 extra mags last night . These are the good old days !

 

[KickStand]

Outstanding! Subgun24's 76 kit was home run for me . Everybody that tries it loves it .
Bought the Uzi kit and 3 extra mags last night . These are the good old days !

Happy you got one.

I’ll have a review up, once I get mine (with videos too).

 

[KickStand]

Guys, Todd’s Uzi .22LR Slo-Fire kit is absolutely top-notch. The craftsmanship really stands out, and the presentation is flawless. You can tell a lot of care went into every detail with this kit (can’t wait to report back).

I’m looking forward to making some serious noise this weekend with SubGun24’s Slow Fire Kit!

 

[hacker]

Nice pictures. What are the plastic parts in the parts box? And what is the curved metal piece with two holes to the right of the parts.

 

[subgun24]

None of these parts are necessary, unless you find them necessary. LOL. Some Group industries guns are finicky.

There are barrel spacers that allow you to move the barrel forward 1.5mm if necessary. On some guns magazine wells are very close to the barrel and need a little space. If you use a barrel spacer, then I provided a ring that keeps the barrel nut tight.

The green donuts allow you to increase the rate of fire by stiffening the spring. You put them on the recoil rod before you put the spring on. You would be amazed at how much 4mm at a time increases the ROF.

I provided a bunch of each part in case you find them helpful. My goal would be that no one would need to use any of these, but it's better to have them in hand. Contact me directly if you have any issues and I can get your gun 100%.

PS. That curved part is a shim, if you need to lower the bolt face. You probably won't need it but its there just in case.

 

[AKarms]

Guys, Todd’s Uzi .22LR Slo-Fire kit is absolutely top-notch. The craftsmanship really stands out, and the presentation is flawless. You can tell a lot of care went into every detail with this kit (can’t wait to report back).

I’m looking forward to making some serious noise this weekend with SubGun24’s Slow Fire Kit!

This looks killer!! I might have to grab one myself

 

[klyph12]

will this conversion work with the Uzi Black Dog and BWE 22 mags ? (since I already have some of those)

 

[KickStand]

will this conversion work with the Uzi Black Dog and BWE 22 mags ? (since I already have some of those)

I’ve got some of those mags (somewhere). Personally, I’m NOT a fan of them. If I can find them, I’ll try them and report back.

Maybe, SubGun24 will know and chime in.

 

[klyph12]

Thank you, I agree the Black Dog mags are not the best, but I would rather get some use out of them instead of just throwing them away.

Is it picky about ammo and do you recommend a certain ammo ?

 

[hacker]

Thank you, I agree the Black Dog mags are not the best, but I would rather get some use out of them instead of just throwing them away.

Is it picky about ammo and do you recommend a certain ammo ?

I am also wanting to know what ammo runs well in this. My Vector conversion only runs with Winchester Super-X or CCI mini mag.

 

[KickStand]

Thank you, I agree the Black Dog mags are not the best, but I would rather get some use out of them instead of just throwing them away.

Is it picky about ammo and do you recommend a certain ammo ?

I am also wanting to know what ammo runs well in this. My Vector conversion only runs with Winchester Super-X or CCI mini mag.

I’ll report back this weekend, with some results.

 

[Kramer]

I wanna grab one of these. Just got to get mine out of the safe to see what trunion it has.

 

[KickStand]

I just installed my kit and this has to be the nicest 22LR Sub-Cal kit ever made for the Uzi!
The box is such a plus. I had my spare bolt, barrel, mag and recoil spring assembly sitting on the dinning room table. They all fit perfect in the 22 conversion kit box (Todd has really thought of everything). Also, I had to use a spacer (that was provided) for my Group / Vector (stupid easy). I’m probably going to do a short video for people too.

 

[KickStand]

GET ONE!


Video review below: