Two new Galils

Th3w01f

Member
Feedback: 0 / 0 / 0
Joined
Dec 22, 2010
Messages
21
Here are my two new (at least to me) Galils. I’d like to thank everyone for their help and especially Adipose for talking to me on the phone for 30 minutes before I picked up the 372.

Top MR372, bottom AA 386 ‘S’.

1144757820_559k2-M.jpg
 

Th3w01f

Member
Feedback: 0 / 0 / 0
Joined
Dec 22, 2010
Messages
21
Thanks for the kind words; I didn't plan on two it just worked out that way.
 

BBQCYCLEWERKES

Well-known member
Feedback: 0 / 0 / 0
Joined
Aug 3, 2008
Messages
341
Very nice pair of Galil's. Like mentioned before, now you only need to get the pair in.308's to keep these company. Best of luck with the Galil fever as it appears your well on your way.
 
C

Che

Guest
You are definately in the real deal Galil club now!!!

Beautiful. Take good care of them and they should only go up in value, IMI is not making anymore and everything else is just a clone.
 

fingaz

Well-known member
Feedback: 0 / 0 / 0
Joined
Feb 1, 2010
Messages
62
Th3w01f said:
Here are my two new (at least to me) Galils. I’d like to thank everyone for their help and especially Adipose for talking to me on the phone for 30 minutes before I picked up the 372.

Top MR372, bottom AA 386 ‘S’.

1144757820_559k2-M.jpg

Both are beautiful! Is that AA 386 'S' a 16 inch barrel?
If so, can you provide a dimension from the muzzle to the rear of the gas block on the barrel?

So pretty...
 

adipose

Well-known member
Feedback: 13 / 0 / 0
Joined
May 14, 2010
Messages
1,188
fingaz said:
Both are beautiful! Is that AA 386 'S' a 16 inch barrel?
If so, can you provide a dimension from the muzzle to the rear of the gas block on the barrel?

So pretty...

Fingaz,
On my 386S;
I have a dimension of 6.625; from the end of the muzzle (flashhider), to the rear of the gas block.

I have 4.875 from the inside dimension between the flashhider and rear of the gas block.

Of course that isn't a true dimension of end of muzzle (end of thread barrel), since I didn't take my flashhider off. Plus, when putting your flashhider on, you could thread a little futher from the last time; thus not giving you a total accurate measurement.

Hope that helps.
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.

Please Visit our Sister Sites Below

Sister Board - Sturmgewehr Sister Board - MachinegunBoards


Please consider becoming an UZI Talk Supporter
Top