Umarex Walther .22LR Uzi Optics

[VISUALCRISIS]

Alright guys, so I'm looking at mounting optics on my Umarex/Walther .22LR Uzi and wasn't sure if the mounts listed in the "Optics" section on the homepage would fit. I know the dimensions should be pretty close but if anyone owns both the Umarex version and a IMI/Vector or alike, could you check and see if they are interchangeable? I believe shadeone probably has one but I figured I'd make this a separate thread just in case anyone else has tried these mounting options out. Any help would be appreciated. Thanks guys.

Pictures are of course welcome!

 

[jd_mitchell]

I'm not sure, but I don't think so. From what I've seen, the .22 is pretty much stand alone. I would suggest finding someplace that has the optics you're interested in and check.

 

[pdog]

If this is the Non IMI or Vector Uzi, the ones that are made in 22 only, no. I make them for the full size real Uzi's and have looked at the Ultramax or whatever it is called. The interior is different than the "real" uzi. What I have found is the metal cover on the 22 is not thick enough to tap and drill. Putting screws in as I do from the bottom up, then grinding them down a bit works for the "real" uzi but not enough room on the 22 as the bolt rides against the top cover. If it is a Norinco, IMI or Vector, yes, I have those in stock, look at Gunbroker, under "Uzi scope mount".

 

[jeepstertim]

If you haven't rumbled it yourself, StormWerks are doing a mount.

 

[jeepstertim]

This is mine with an ACOG clone. I have had to shim the front of the scope to get enough depression but works like a dream.

 

[shadeone]

i think you may be the first person to mount an acog on an uzi... besides call of duty

 

[StormWerkz]

Tim,
Are you still using the factory barrel and fake suppressor or have you changed it?

 

[jeepstertim]

Still the original set up. Legally I can only lose 2" off the barrel in the UK, so I'm still looking for the shortest 'forward of muzzle' moderator I can find.

 

[StormWerkz]

Still the original set up. Legally I can only lose 2" off the barrel in the UK, so I'm still looking for the shortest 'forward of muzzle' moderator I can find.

Have you looked at the SAK? 5.5" long and 1.375" diameter. £35.00