Versa 10 updates?

[Slowmo]

So, last night we ran 3 ETS mags through the upper. They ran flawless. Today, we tried the same 3 ETS mags and another 4 other ETS mags. The ETS mags didn't want to work today. I didn't have any Glock or Magpuls with me. I will try again later. But it was a fun day with my oldest.

Here's a video for some LOLz.

My Glock 20 started doing the same thing on its last range trip. Go figure.

 

[Mr. Greg]

Mine came on Saturday, hoping to get it out Wednesday morning.

 

[hacker]

Paid for mine 11/21 and it just shipped today. Seems to be a huge delay in shipping. Looks like I might get it a year after getting on the list.

 

[hacker]

It came today and it did not disappoint. I ran it with the grease gun module and Wolf steel case. Single shots with ease.

The rate of fire is like a Sterling or Grease gun; about as fast as I can tap my finger on the table. With my old Lage M10 upper, I can get doubles if I blip the trigger, but it's usually three.

I was #30 on the list and the serial number is #20.

Now I'm on the list for a Versa 22.

 

[rchaisch]

I did some more tests today.

KCI Korean 33rd steel feed lips - worked great
2 Amend 34rd - ejected itself after a few rounds
Magpul 27rd - ejected itself after a few rounds
Promag 50rd drum - worked great
Magpul 50rd drum - worked great

I've noticed on the mags that get rejected from the adapter, that the feedlips are scraped by the bolt. I'll need to look into this when I have time, which might be about the time when Lage's belt fed gets released.

But here's a video to enjoy.

 

[strobro32]

Nice! Fun times.

 

[rchaisch]

I did some more tests today.

KCI Korean 33rd steel feed lips - worked great
2 Amend 34rd - ejected itself after a few rounds
Magpul 27rd - ejected itself after a few rounds
Promag 50rd drum - worked great
Magpul 50rd drum - worked great

I've noticed on the mags that get rejected from the adapter, that the feedlips are scraped by the bolt. I'll need to look into this when I have time, which might be about the time when Lage's belt fed gets released.

But here's a video to enjoy.

I took apart the upper wiped it down today. It looks like the bolt is hitting/rubbing the magazine feedlips.

Does everyone else's Versa 10 Glock adapter look like this?

I'm wondering if this is why some stick mags are being ejected from the upper.

 

[Jmacken37]

1) are you inserting mags on a closed bolt? Sorry, I wasn't paying attention when I watched the video the other day? It is better to insert on an open bolt, as the mag well latch might not be completely in the catch area of the mag.
2) Are Glock/OEM mags kicking out, or only aftermarkets? I've had very good luck with Glock sticks and haven't really messed with any aftermarket sticks.

 

[rchaisch]

1) are you inserting mags on a closed bolt? Sorry, I wasn't paying attention when I watched the video the other day? It is better to insert on an open bolt, as the mag well latch might not be completely in the catch area of the mag.
2) Are Glock/OEM mags kicking out, or only aftermarkets? I've had very good luck with Glock sticks and haven't really messed with any aftermarket sticks.

1. Bolt open always

2. I don't think I have any actual Glock mags

 

[m11stuff@hotmail.com]

If you would like to, you can send the mag module back and we will replace the mag catch lever with one that sits .020” lower. Hopefully, this will give you the extra clearance you need. No charge, just the cost of shipping it back. Please include a note for us to install a .020” lower mag catch lever. We should be able to turn it around in a couple of days.

 

[Jmacken37]

That’s awesome customer service!

 

[skoda]

I had some fit/function issues with my M11/9 Versa Soumi adaptor. The folks at Lage took care of me.

On a side note, My Soumi adaptor is a little tight in 'normal' weather. I took it out today in 18 deg F temperature and it was really tight. A little more so and the mags wouldn't have fit. Back home the mags fit as usual.

 

[rchaisch]

If you would like to, you can send the mag module back and we will replace the mag catch lever with one that sits .020” lower. Hopefully, this will give you the extra clearance you need. No charge, just the cost of shipping it back. Please include a note for us to install a .020” lower mag catch lever. We should be able to turn it around in a couple of days.

Yes sir, I will do that. I'll probably ship it back late this week or early next week. I'll email you guys when it's shipped.

 

[LawBob]

I did some more tests today.

KCI Korean 33rd steel feed lips - worked great
2 Amend 34rd - ejected itself after a few rounds
Magpul 27rd - ejected itself after a few rounds
Promag 50rd drum - worked great
Magpul 50rd drum - worked great

I've noticed on the mags that get rejected from the adapter, that the feedlips are scraped by the bolt. I'll need to look into this when I have time, which might be about the time when Lage's belt fed gets released.

But here's a video to enjoy.

Try again w stick but open the bolt before insertion

 

[BlackBelt]

I got her all dressed up, but cant take to a party until this weekend.
I hope she runs as good as she looks

 

[strobro32]

I've been shooting my Versa 12 on my land recently and my wife makes us pick up the brass. The V12 drops the 9mm cases in a small pile. Very consistent. My son has to pic up the 22 cases from the TX22 that are everywhere.

 

[Suzuki1750]

So, last night we ran 3 ETS mags through the upper. They ran flawless. Today, we tried the same 3 ETS mags and another 4 other ETS mags. The ETS mags didn't want to work today. I didn't have any Glock or Magpuls with me. I will try again later. But it was a fun day with my oldest.

Here's a video for some LOLz.

i have the same problem

 

[Suzuki1750]

received my versa 10/9 upper the other day. got it with the cz module and the g17 module.
the cz module, the mag well was very tight with factory mags. I had to sand down the inside of magwell to get any mags to fit. Took it out and ran flawlessly. The mags wont drop on their own when paddle is pressed, but thats ok. at least they dont fall out like my g17 module.

The g17 module. the magwell is so loose, the only mag that hasnt fallen out so far when shooting is the factory glock mag. any other mag just falls out when firing.

 

[rchaisch]

received my versa 10/9 upper the other day. got it with the cz module and the g17 module.
the cz module, the mag well was very tight with factory mags. I had to sand down the inside of magwell to get any mags to fit. Took it out and ran flawlessly. The mags wont drop on their own when paddle is pressed, but thats ok. at least they dont fall out like my g17 module.

The g17 module. the magwell is so loose, the only mag that hasnt fallen out so far when shooting is the factory glock mag. any other mag just falls out when firing.

My module is back at Lage. I'm waiting for it to come back with a lower mag catch. I'll post my results whenever I have it in hand.

 

[BlackBelt]

I took mine out (M10-9 -g17 mag model, pictured above) and ran a little over 600 rounds through it only using Glock factory 33 rd mags. It had zero issues firing a mix of 115, 124 and 147 gr rounds.
I had been expecting the mags to fall out from what I had read here, but they all locked up securely in the magwell and I had no involuntary mag drops.
I did carry a couple of ETS glock mags but didnt get around to trying them.
Very very happy with my Versa