What suppressors are people using on the m11/9 and how are they attached ?

[panhead5]

I know a lot of folks use suppressors on their m11/9 's and I was wondering which are the most popular and attachment methods I.E. threaded on or 3 lug barrels . Mine will be in jail for awhile and is currently in a stock configuration .

 

[MPA guy]

Mine is a threaded barrel.

Though it's an M10, not that it really matters.

 

[MAC702]

I already have an AAC Ti-Rant in .45 and I plan to use that one. I only recently bought my M-11/9 as well as two different Lage uppers (and .22 kit) so I've only been using my buddy's lower a couple times while I wait the year for paperwork to go through. I haven't gotten to suppressor or rimfire testing yet. So, anyway, I'm already set up for the threaded barrel on the Lage uppers, and will just stick with that.

 

[CapnMorgan]

My Max-11 lage upper has a 3 lug barrel, I'm building a stock m11/9 upper that uses the ilwt 8 3/8" barrel with an AR free float hand guard, It currently is 1/2 x 28 threads but I ordered the ilwt 3 lug adapter. My stock upper is 3/4 x 10 and my suppressor, silencerco hybrid, can't attach to it. Probably buy an ilwt 3 lug barrel for it when they're available.

My M10(still in jail) is only 7/8 x 9 threads. I may have a barrel threaded 5/8 x 24 and use my 30 cal direct thread mount but not sure, I'm thinking about a coastal mims 45 with mac adapters. That way I can shoot cast lead and 22 lr through it.

The Hybrid works great and I use it on almost every gun I own. The only dislike I have is it doesn't come apart so no lead through it.

Threaded kinda sucks on f/a. They get very hot very fast and are very difficult to unscrew. 3 lug is still a challenge to get off when hot. I always forget an oven mitt.

 

[Hey...]

If 380 or 9mm the best is HK3-lug. Never unscrews. Hands stay off the hot potato.

If 45 you're stuck with threads both old school or modern. Then it comes down to having a good suppressor cover to protect your hand from the heat.

 

[PDXsparky]

I have a Bowers Vers 9s and I have adaptors for: 1/2 -24 threads, original M11/-9 threads, Uzi barrel nut, and 3 lug. I have a 3 lug barrel on 3 of may Lage uppers, so that's what I prefer to use.

 

[hbar314]

Bowers Vers 9s....love it and they are great people.
3 lug all the things!
I got tired of worrying about the can coming unscrewed after long bursts. And then its too hot to want to touch and worry about.

 

[plodder]

I use a Form 1 homebuilt stainless 9" with K baffles. I cut 1/2" x 28 threads on the end of my barrel and direct thread it.

 

[Aim4fun]

AWC MK9 with 1/2-36 threads for both my Mac 11 and Max 31. It's a large old school can but works great.

 

[bigj480]

Still using the Gemtech MK-9K 3-lug.

 

[agriebel]

Bowers Vers9 with three lug

 

[Svelectric1]

My m11 is still in jail next to the Wolf 9 SD that will be attached via 3 lug. Can't wait for that combo.

 

[pa123guns]

Bower vers9

Depends on the upper sometimes stock threads and sometimes 3 lugs. Can’t go wrong.

 

[Blksniper2000]

Gemtech mk9k 3lug

 

[HighriseATX]

As said above, 3lug is best if you are 9mm. I have a Bower Vers9s and it is wonderful. However, I find that I mainly use the Omega 9k, really like the smaller size and sound suppression is very good (although not as good as the bowers).

 

[JJ1234567]

Gemtech MK-9k direct thread.

 

[Wetworks]

Been using a thread on trident for a long time.

 

[TheColtCollector]

https://m.youtube.com/watch?t=916s&v=0XFNbGmewPE

That’s me and my suppressed set up. Direct thread with a custom bowers-esque clone that is user serviceable and all titanium. I also have a smaller stainless form 1 can that I like. But with my powdercoat lead ammo, direct thread is a must and I can’t have aluminum suppressor parts with the level of lead suppressor cleaning required

 

[X-Ray Zulu]

Bowers Upgraded CAC-9, Griptastic, 3/4x10...

 

[bac0nfat]

Bowers Vers9s, and unfortunately it's unusable on the Max-11 mk1 even with internal and external gas blocks. Too much gas in the face when shooting. I'm not sure how other people have such good luck with it. So I now run the Bowers on my 300 blackout which works great, and just shoot the Max-11 unsuppressed.