Which Side Folder Allows Firing When Folded w/ Max-11?

Wahnsinn

Well-known member
Feedback: 0 / 0 / 0
Joined
Jan 23, 2011
Messages
372
Location
North Texas
Hi guys, title pretty much says it. Checking to see which side folders out there will allow firing when it is folded to the side without interfering with either the ejection port or the side cocking knob (short or long). Just one or the other, if it works one way, I'm good with that.

I know I've seen a couple mentions that the ACE adapter from Lage with the ACE skeleton rubs a little (a lot?) on the cocking knob, others that I've looked at would seem to be the same. Practical uzi style does, but I think it sits pretty low (see below about cheek weld).

I'm almost thinking I'd also be good with just the Lage collapsible stock, trying to figure in my head (and with some props) if I'd really need the cheek weld on the stock. Guess I'm just thinking that way since none of my smaller guns have ever had stocks, just my big rifles.

Thanks.

Tim
 

root

UZI Talk Supporter
Feedback: 59 / 0 / 0
Joined
Jan 15, 2003
Messages
4,096
This works great for me no jams and the cases fly (well not with me I'm a lefty) and yes it's a PS stock.

MVC-016F-1.jpg


MVC-018F.jpg


THis is with the sidecocker, PS front grip, and PS mini stock, all works well with all the people that have run it.

One guy is 6 8 and I asked if he thought it needed a longer stock pull?

His answer was NO it's short enough to keep it under control but long enough to sight with. I'm 5 7 inches short!

YMMV and YES I did Stay in a holiday inn last night !!!!
 

Wahnsinn

Well-known member
Feedback: 0 / 0 / 0
Joined
Jan 23, 2011
Messages
372
Location
North Texas
Do you rest your cheek on it or just use the stock to hold tight and aim similar to how you would with a handgun?
 

root

UZI Talk Supporter
Feedback: 59 / 0 / 0
Joined
Jan 15, 2003
Messages
4,096
Weld up tight. with the two stage on it it just pours them in like a tommy gun.

More accurate than my friends Mini UZI and has more control, but not as nice as his west hurley tommy.

Ya do got to pull it in tight and get a check weld then just pull the trigger burst or mag dumps it stay right on target.

I'm a lefty so I can close the stock and shoot it wit both hands off of my hip and the brass falls to my feet after hitting my torso.
My buddies can shoot it righty with the PS forward grip and stock closed it just dumps the brass as usual.

For me I like it.

I also have two other uppers that are factory and the top cocker you see in the pix.

I like them all and can't wait for the AA M/10 9mm upper.
bandwith pix Just for Grandeman

mac103.jpg


hope my comments help you to decide.
if you are a righty you may want to l@@k into a left side folder from another company. I have NO experience with any other stock other than the factory and that's one that will stay on the shelf. as far as I'm concerned I'll keep this and never switch.

It's a subgun NOT a Beauty contest! And works for me.
 

Spectre

Well-known member
Feedback: 2 / 0 / 0
Joined
Mar 15, 2006
Messages
238
Location
Northern Virginia
I have the Lage side folder on mine. I milled a slight relief along the top rail so the bolt handle could reciprocate without binding, and it runs great folded.
 

svtcobra

Well-known member
Feedback: 1 / 0 / 0
Joined
Mar 21, 2011
Messages
94
I have the Lage side folder on mine. I milled a slight relief along the top rail so the bolt handle could reciprocate without binding, and it runs great folded.

Can you post a picture of your mod?
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.

Please Visit our Sister Sites Below

Sister Board - Sturmgewehr Sister Board - MachinegunBoards


Please consider becoming an UZI Talk Supporter
Top