UZI Talk Forums
+ Reply to Thread
Results 1 to 3 of 3

Thread: IMI Mini Uzi SMG Faliure to Eject

  1. #1
    Registered User
    Join Date
    Jul 2015
    Posts
    8

    IMI Mini Uzi SMG Faliure to Eject

    I have a 9mm IMI Mini Uzi SMG that is having some failure to extract/eject and double feed/jamming issues during full auto fire. I got it directly from IMI over 30 years ago and it has had a lot of rounds (maybe 20,000+) through it. So I am I'm thinking it is time to replace the extractor, and.....what else????? Any suggestions? The exploded view I saw - admittedly not a great copy, I could only find it online - does not show an extractor spring or an ejector, just an extractor and extractor pin. I'm hoping the experts here can suggest what needs to be replaced and where to get the parts!

  2. #2
    Administrator
    RoverDave's Avatar
    Join Date
    Dec 2002
    Location
    ND
    Posts
    15,959
    Be sure to run through this article for tips. There is no extractor spring, as you can see in the article. Be sure the pull the extractor and clean it and the extractor hole in the bolt. That can get full of crud and cause the extractor not to work properly.
    Looking for the definitive reference book on UZI history and technical information? Check out my book The UZI Submachine Gun Examined. Details to order a copy are here.

  3. #3
    Registered User
    Join Date
    Jul 2015
    Posts
    8
    Great, many thanks for the info and the article!

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts


Please consider becoming an UZI Talk Supporter.